Clutch update
Thread Starter
Le Mans Master
Joined: Aug 1999
Posts: 7,339
Likes: 137
From: WilkesBarre PA
I pulled it all apart this morning (about 1 1/2 hours 
) I found the clutch fork piviot ball loosened up whitch was causing the throwout bearing to engage too far making the grinding noise. The clutch looks ok but at 30,000 I think I beter replace it all while it's apart.
) I found the clutch fork piviot ball loosened up whitch was causing the throwout bearing to engage too far making the grinding noise. The clutch looks ok but at 30,000 I think I beter replace it all while it's apart.
Thread Starter
Le Mans Master
Joined: Aug 1999
Posts: 7,339
Likes: 137
From: WilkesBarre PA
New centerforce dual friction in, all back together except the exhaust. Started putting the DRM Longtubes on. One header on. Hopefully it will be back on the road by Wed so I can break in the clutch for E-Town on Sat. My O2 Simulators should be here by then too.
