tnz5106

I am calling the guy tomorrow about the car. It is my dream ZR-1. Does anyone know how many '90 Z's had the full Lingenfelter package like this one? The original owner had to fork out around 100k total for this car in 1990. Thats like 200k today!!

Is there anything I need to be carefull about on these modded cars besides the obvious? The item # is 270725746304 in case you can't find it.

I think these are very rare and very, very fun cars. I can't imagine having that much more power in an LT-5............thanks

STL94LT1

I wonder which LT5 engine package it has, for $50k 415ci?

SurfnSun

Ebay is legal now...here is the auction.

$30k for a 415ci (if thats what it is) is money!

http://cgi.ebay.com/ebaymotors/ws/eB...fvi%3D1&_rdc=1

lite blue

Black looks so good on a '90. Hides the molding.

902066

I think the molding on a 90 looks the best of all 6 years.

tnz5106

i agree, if only it had the flat dash of the'89s!!!!!

Polo-1

The ad said over 600hp Thats the 415.
To push it to $50k I would think it has ti rods and over sized valves and cams. Other wise standard LPE 415 $34k

Demps

Didn't think LPE did 415s in 90--later.?
Ted

lgaff

I shot an e-mail over to them to get more info

ZR-71

Wow very cool car for a decent price

lisoundsvette

THAT CAR HAS A 368 cid C4 PACKAGE THAT COST $14,000

solid dobe

There sure are some tempting ones becoming available. Wonder whatever became of those 4 twin turbo Lingenfelter ZR-1s.

STL94LT1

Here's one.

http://www.mecum.com/auctions/lot_de...GROUP_ID=10055

rickyrj1

I so want that car. What does everybody think it will sell for?

STL94LT1

The 415 wouldn't be bad either!!

tnz5106

The seller has receipts for ovr 50k from lpe. How did you come to that conclusion?

lisoundsvette

I have seen this car at the Atlantic City Car Auction in N.J. back in february 2011.
the car only hit 19,000 on the auction block

the LPE invoice displayed showed $16,xxx for:
the 368 lt5
eradispeed rotors
pads
wires
clutch


car looked clean for 31k miles

solid dobe

mercy, what a car

svo351

Sure would have been a steal at $30k for a 415.. LPE does nice work. Current Pricing:

530 BHP / 450 lbs-ft of torque

Package includes:

- Engine removal, inspection and disassembly
- Custom porting & polishing - cylinder heads, plenum assembly and injector housings
- Special three angle valve job, checking of spring tension and heights
- Titanium valve spring retainers
- Surfacing of cylinder heads to insure sealing and improve compression
- Camshaft profile enhancements through our special degreeing procedure
- Reassembly and blueprinting of the top section of the engine
- Inspection and disassembly of the lower section of the engine
- Custom JE forged pistons - 12.0:1 compression ratio
- Custom iron cylinder sleeves - 4.00" diameter
- Custom rod and main bearings
- Fully machined, 4340 forged steel connecting rods - 5.850" length
- Computer balanced rotating assembly
- Reassembly and blueprinting of the lower section of the engine
- K&N air filter and cleaning kit
- Corsa 304 stainless steel exhaust system
- Intake manifold engraved with LINGENFELTER and hand painting of letters
- Lingenfelter custom ZR1 paint for a better than new engine finish
- Chassis dyno report
- 2 year/24,000 mile warranty

1990 - 1995 Corvette Package Price

Price - $22,550.00

93Polo

http://forums.corvetteforum.com/c4s-...owner-new.html

LPE posted on here.