FS: 2003 Z06 - None Nicer
03-04-2005, 04:24 PM
#1
Race Director
Thread Starter
FS: 2003 Z06 - None Nicer
Thinking about selling my 2003 Z06.
Specs:
Torch Red
8,400 miles.
Never raced.
Custom Vette Essentials interior. All leather is torch red/carbon fiber including steering wheel, seat covers, console cover, door handles, shift boot, emergency brake boot, shift ****, brake ****. The seats have been converted from standard Z06 seats to sport seats (minus lumbar support).
Complete carbon fiber engine compartment
Carbon fiber brake ducts
B&M Ripper shifter
Halltech Sidewinder "airbox"
Custom storage tray/cup holders behind the seat in the cargo area
Andy's custom interior partiion. Red Acyllic on both sides with 03 anniversay badges.
Custom machined/red painted wheels
B&B Bullet exhaust.
Aluminum guage bezels.
Aluminum shift **** insert
Metal gas pedal. Matches the clutch and brake pedals perfectly.
Mirror'ed trunk lid.
Chrome front and rear lettering.
Original window sticker, video, owner's manual, dealer brochure.
Clean, clean, clean. How clean? It just took first place in the modified street category at the Corvette/Chevy Expo here in Houston.
Also included are a set of OEM Z06 wheels that have been chromed, complete with Goodyear Supercar tires (approximately 3,000 miles on the tires), the original red fuel rail covers, original air box, original shifter, 2 sets of floor mats; 1 set from Lloyd's and one set from Startmosphere.
Still has almost 2 years left on the warranty.
I think that's it, but I may be missing something.
Price: $40,000 firm. I know you can buy cheaper, but you can't buy nicer. This is a firm price as I'm not willing to give the car away. It is worth every penney.
Pictures in following post:
Specs:
Torch Red
8,400 miles.
Never raced.
Custom Vette Essentials interior. All leather is torch red/carbon fiber including steering wheel, seat covers, console cover, door handles, shift boot, emergency brake boot, shift ****, brake ****. The seats have been converted from standard Z06 seats to sport seats (minus lumbar support).
Complete carbon fiber engine compartment
Carbon fiber brake ducts
B&M Ripper shifter
Halltech Sidewinder "airbox"
Custom storage tray/cup holders behind the seat in the cargo area
Andy's custom interior partiion. Red Acyllic on both sides with 03 anniversay badges.
Custom machined/red painted wheels
B&B Bullet exhaust.
Aluminum guage bezels.
Aluminum shift **** insert
Metal gas pedal. Matches the clutch and brake pedals perfectly.
Mirror'ed trunk lid.
Chrome front and rear lettering.
Original window sticker, video, owner's manual, dealer brochure.
Clean, clean, clean. How clean? It just took first place in the modified street category at the Corvette/Chevy Expo here in Houston.
Also included are a set of OEM Z06 wheels that have been chromed, complete with Goodyear Supercar tires (approximately 3,000 miles on the tires), the original red fuel rail covers, original air box, original shifter, 2 sets of floor mats; 1 set from Lloyd's and one set from Startmosphere.
Still has almost 2 years left on the warranty.
I think that's it, but I may be missing something.
Price: $40,000 firm. I know you can buy cheaper, but you can't buy nicer. This is a firm price as I'm not willing to give the car away. It is worth every penney.
Pictures in following post:
Last edited by Corvette SSX; 03-06-2005 at 02:26 PM.
03-05-2005, 11:37 AM
#5
Safety Car
Member Since: Nov 1999
Location: Spring(Houston) TX
Posts: 3,715
Likes: 0
Received 0 Likes
on
0 Posts
You making the move to a C6 or moving away all together this time SS?
I love your car. If I could find a way to dump my Envoy or Infiniti FX45, I would probably give you a call.
I gotta look the pics again. Good luck to ya in the sale and TTT.
I love your car. If I could find a way to dump my Envoy or Infiniti FX45, I would probably give you a call.
I gotta look the pics again. Good luck to ya in the sale and TTT.
Last edited by GEAUX; 03-05-2005 at 11:41 AM.
03-05-2005, 04:24 PM
#7
Team Owner
Not hi jack your thread but where did you get the Custom storage tray?
If you want to part out some of the engine bay CF let me know, I'm interested in finishing of my CF project.
Tom
If you want to part out some of the engine bay CF let me know, I'm interested in finishing of my CF project.
Tom
03-05-2005, 07:34 PM
#8
Race Director
Thread Starter
Originally Posted by AFVETTE
Not hi jack your thread but where did you get the Custom storage tray?
If you want to part out some of the engine bay CF let me know, I'm interested in finishing of my CF project.
Tom
If you want to part out some of the engine bay CF let me know, I'm interested in finishing of my CF project.
Tom
Thanks for the interest, but the car will be sold as is.
Best of luck with the sale. 
03-06-2005, 09:11 PM
#11
Team Owner
Member Since: Mar 2001
Location: Adventure, excitement ... a Jedi craves not these things.
Posts: 106,480
Likes: 0
Received 1 Like
on
1 Post
Cruise-In VII Veteran
Beautiful car from a very highly regarded Forum member. Someone will get a perfect car.
Hope to see you over in C6, SSX.
Hope to see you over in C6, SSX.
Good luck with your sale and hopefully you'll be getting another Vette to replace it. 
