WTB Built Centri/Turbo C5 FRC or ZO6
#21
Tech Contributor
I've just started Physical Therapy school so I don't really have time to enjoy the car (or even drive it anymore). Im willing to listen to an offer.
2002 Corvette Coupe Z51, Manual Trans.
All options such as HUD, dual zone climate, etc...
95,xxx original miles
Mods:
Motor: ~10,000 miles
LME built 347cid (still have build sheet)
GM 6.0L "317" heads with dual valvesprings
Dallas Performance turbo cam
LS2 intake/TB
Dual walbro pumps with Fuelab regulator and return system
APS Twin Turbo kit ~5,000 miles
Turbos rebuilt 1 year ago
Turbowerx scavenge pump
All SS braided lines with AN fittings for wastergates and turbo feeds/drains
Manifolds and exhaust housings are hi-temp coated
Turbosmart Eboost2 controller
AlkyControl Methanol Injection
I would say paint is in very good shape but does have a few blemishes like a car would. Most of the car was actually repainted 3 years ago due to adding Tigershark front fascia and Specter werkes rear fascia
Misc. Mods:
Output shafts in diff upgraded
DTE Transmission brace
Borla exhaust
Corbeau seats
Fuel and Air/fuel gauges
Z06 spyder wheels and brand new tires (both less than 6mo. old)
New Bilstein shocks
B&M shifter
The car made 721/720 rwhp at 18psi at Dallas Performance last month.
2002 Corvette Coupe Z51, Manual Trans.
All options such as HUD, dual zone climate, etc...
95,xxx original miles
Mods:
Motor: ~10,000 miles
LME built 347cid (still have build sheet)
GM 6.0L "317" heads with dual valvesprings
Dallas Performance turbo cam
LS2 intake/TB
Dual walbro pumps with Fuelab regulator and return system
APS Twin Turbo kit ~5,000 miles
Turbos rebuilt 1 year ago
Turbowerx scavenge pump
All SS braided lines with AN fittings for wastergates and turbo feeds/drains
Manifolds and exhaust housings are hi-temp coated
Turbosmart Eboost2 controller
AlkyControl Methanol Injection
I would say paint is in very good shape but does have a few blemishes like a car would. Most of the car was actually repainted 3 years ago due to adding Tigershark front fascia and Specter werkes rear fascia
Misc. Mods:
Output shafts in diff upgraded
DTE Transmission brace
Borla exhaust
Corbeau seats
Fuel and Air/fuel gauges
Z06 spyder wheels and brand new tires (both less than 6mo. old)
New Bilstein shocks
B&M shifter
The car made 721/720 rwhp at 18psi at Dallas Performance last month.
#23
Former Vendor
Member Since: Mar 2008
Location: Lewisville TX
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts