FS: 2000 C5 Corvette - 427 LS3 (Bay Area - CA)
#1
Racer
Thread Starter
2000 C5 Corvette - 427 LS3 (Bay Area - CA)
$27000
It has been a long adventure for me with this car, although it's time to get something more reasonable to be my daily driver. Car is well on its way to be a fun track car. Drives and handles great, although it needs improvement on traction - will spin in first, second, and potentially third.
I am willing to work with a serious buyer, can drive or ship if desired.
Car is heavily modified.
Full list of known modifications at the bottom of post.
Fun numbers ~530WHP/520Tq
~2k miles on powertrain (Engine/Clutch/Driveshaft/Transmission/Diff)
~110k on Odometer
Tuned by Synergy Motorsports
427 LS3 Engine by HINSON Supercars
T6060/C6Z Diff - Drivetrain by RKT Performance
Assembled by Sounds of Speed Performance
Receipts are available for work performed / specs of parts. The interior has been sound deadened.
Car has a WA title.
-Car has been in one accident, I drove up onto a curb. Subframe and radiator were replaced.
-Oil level sensor is currently faulty (possible the wires melted on the headers)
-No AC currently.. probably needs to be filled up. I installed a new compressor with new engine.
-no cats, will NOT PASS EMISSIONS.
Paint and interior are in good / okay condition. This is not a garage queen by any means.
Tunnel - Heat shielded
Dyno run
Transmission/Rearend
RKT T6060 / C6 Diff/Trans Upgrade
ECS Brace
Drive Shaft DSS 3.5"
Engine
GM Block LS3/L92
TSP LS6 Ported Oil Pump
ARP Main Stud Kit LS1/LS2/LS3/LS7
K1 Technology 4340 Forged LS1 Crankshaft 4.125' 24x
K1 Technology H-Beam Billet LS1 Connecting Rods 6.125', Stroker
Diamond Piston - 4.065", 4" Stroke, 6.125" Rod, DISH (12deg L92 Pockets)
GM LS 24x Reluctor Wheel
ARP Hex Head Bolt Kit LS2/LS3/LS7
Trickflow 255cc CNC Ported Cylinder Heads LS3, Steel Retainers, 465 lb Valve Springs
Yella Terra Ultralite Rockers LS3/L92, 1.7 Ratio Non-Adjustable
Custom Grind Bullet Camshaft - 243/247 .654 .657 112 lsa
Comp Cams 5/16' Magnum Chromoly Pushrods 7.450'
JP Timing Set Single Roller LS1
Powerbond 25% Underdrive Pulley, 97-13 C5/C6, 08-09 G8 GT, 09 GXP, Chevy SS
McLeod RXT Street Twin Disc Clutch (LS1-LS7)
McLeod Steel Billet Flywheel (LS1-LS7)
Walbro Corvette 255lph 97-03 C5 Fuel Pump
DeatschWerks 60lb LS1 Injectors
Holley Billet Fuel Rail Kit LS1/LS2/LS3
LS3 Intake
LS2 TB
Halltech CAI w/ LS7 MAF
Hinson 1 7/8Headers / X pipe
Parts.. Continued:
Ticks Adjustable Master Cylinder
R1 Concepts Front Rotors/Pads (slot/drilled)
DeWitts Radiator w/ Oil cooler
Elite Engineering Oil Catch Can
Hotchkis Sway Bars
Corbeau A4 Seats
Stance SS/GR2+ Coilovers
CCW 505A's 18x9.5F/ 19x11R
SFK Wheel Bearings
Moog Ball Joints (Upper and Lower)
Wheel Bearing Fastener Kit
Elite Engineering Tunnel Brace 1/4th (thermal)
Radioflyer Bi-xenon headlights
Window Tint
Optima Battery
Bump Steer Kit Front/Rear
"Audio: Headunit, Amp, Sub, Components
>Pioneer Headunit "
Remote Bleeder (clutch)
Remote Oil Sender
Heat shielding on wiring harnesses and starter.
It has been a long adventure for me with this car, although it's time to get something more reasonable to be my daily driver. Car is well on its way to be a fun track car. Drives and handles great, although it needs improvement on traction - will spin in first, second, and potentially third.
I am willing to work with a serious buyer, can drive or ship if desired.
Car is heavily modified.
Full list of known modifications at the bottom of post.
Fun numbers ~530WHP/520Tq
~2k miles on powertrain (Engine/Clutch/Driveshaft/Transmission/Diff)
~110k on Odometer
Tuned by Synergy Motorsports
427 LS3 Engine by HINSON Supercars
T6060/C6Z Diff - Drivetrain by RKT Performance
Assembled by Sounds of Speed Performance
Receipts are available for work performed / specs of parts. The interior has been sound deadened.
Car has a WA title.
-Car has been in one accident, I drove up onto a curb. Subframe and radiator were replaced.
-Oil level sensor is currently faulty (possible the wires melted on the headers)
-No AC currently.. probably needs to be filled up. I installed a new compressor with new engine.
-no cats, will NOT PASS EMISSIONS.
Paint and interior are in good / okay condition. This is not a garage queen by any means.
Tunnel - Heat shielded
Dyno run
Transmission/Rearend
RKT T6060 / C6 Diff/Trans Upgrade
ECS Brace
Drive Shaft DSS 3.5"
Engine
GM Block LS3/L92
TSP LS6 Ported Oil Pump
ARP Main Stud Kit LS1/LS2/LS3/LS7
K1 Technology 4340 Forged LS1 Crankshaft 4.125' 24x
K1 Technology H-Beam Billet LS1 Connecting Rods 6.125', Stroker
Diamond Piston - 4.065", 4" Stroke, 6.125" Rod, DISH (12deg L92 Pockets)
GM LS 24x Reluctor Wheel
ARP Hex Head Bolt Kit LS2/LS3/LS7
Trickflow 255cc CNC Ported Cylinder Heads LS3, Steel Retainers, 465 lb Valve Springs
Yella Terra Ultralite Rockers LS3/L92, 1.7 Ratio Non-Adjustable
Custom Grind Bullet Camshaft - 243/247 .654 .657 112 lsa
Comp Cams 5/16' Magnum Chromoly Pushrods 7.450'
JP Timing Set Single Roller LS1
Powerbond 25% Underdrive Pulley, 97-13 C5/C6, 08-09 G8 GT, 09 GXP, Chevy SS
McLeod RXT Street Twin Disc Clutch (LS1-LS7)
McLeod Steel Billet Flywheel (LS1-LS7)
Walbro Corvette 255lph 97-03 C5 Fuel Pump
DeatschWerks 60lb LS1 Injectors
Holley Billet Fuel Rail Kit LS1/LS2/LS3
LS3 Intake
LS2 TB
Halltech CAI w/ LS7 MAF
Hinson 1 7/8Headers / X pipe
Parts.. Continued:
Ticks Adjustable Master Cylinder
R1 Concepts Front Rotors/Pads (slot/drilled)
DeWitts Radiator w/ Oil cooler
Elite Engineering Oil Catch Can
Hotchkis Sway Bars
Corbeau A4 Seats
Stance SS/GR2+ Coilovers
CCW 505A's 18x9.5F/ 19x11R
SFK Wheel Bearings
Moog Ball Joints (Upper and Lower)
Wheel Bearing Fastener Kit
Elite Engineering Tunnel Brace 1/4th (thermal)
Radioflyer Bi-xenon headlights
Window Tint
Optima Battery
Bump Steer Kit Front/Rear
"Audio: Headunit, Amp, Sub, Components
>Pioneer Headunit "
Remote Bleeder (clutch)
Remote Oil Sender
Heat shielding on wiring harnesses and starter.