FS: 2000 Hardtop - Nassau Blue
#41
Le Mans Master
Thread Starter
Car is still available...
#44
Le Mans Master
Thread Starter
#46
Le Mans Master
Thread Starter
#47
Gauge cluster mileage updated to match the chassis?
Suspension mods?
Exhaust mods?
Driveline mods? Shifter etc?
Any paint/body work/blemishes?
Do the side bolster bladders in the sport seats work? On both sides? FRC had manual passenger seat so assuming it maybe only works driver side?
Have the FRC seats?
Did you use the Z06 template the measure and cut for the ducts? Is it my eye or are they a little closer to the door gap than a Z06?
Suspension mods?
Exhaust mods?
Driveline mods? Shifter etc?
Any paint/body work/blemishes?
Do the side bolster bladders in the sport seats work? On both sides? FRC had manual passenger seat so assuming it maybe only works driver side?
Have the FRC seats?
Did you use the Z06 template the measure and cut for the ducts? Is it my eye or are they a little closer to the door gap than a Z06?
Last edited by RapidC84B; 10-18-2017 at 10:36 PM.
#48
Le Mans Master
Thread Starter
Gauge cluster mileage updated to match the chassis? Cluster is off a few thousand. (Total miles are just under 48k)
Suspension mods? Bilstien Shocks, drilled/slotted cad-plated rotors, with EBC Green pads, Z06 sway bars, adjustable end links
Exhaust mods? Stock Z06 cat back, new H-pipe from manifolds back to Titanium rear pipes
Driveline mods? Shifter etc? Added Elite Engineering tunnel plate
Any paint/body work/blemishes? Paint was show quality job done in 2002 and has minor road chips that would occur in about 8,000 miles of driving
Do the side bolster bladders in the sport seats work? On both sides? FRC had manual passenger seat so assuming it maybe only works driver side? Sport seats are powered on both sides, all electrical functions except bolster bladders function, memory functions
Have the FRC seats? No
Did you use the Z06 template the measure and cut for the ducts? Is it my eye or are they a little closer to the door gap than a Z06? Yes, used the Z06 template to install the ducts, both front and rear are fully functional
Suspension mods? Bilstien Shocks, drilled/slotted cad-plated rotors, with EBC Green pads, Z06 sway bars, adjustable end links
Exhaust mods? Stock Z06 cat back, new H-pipe from manifolds back to Titanium rear pipes
Driveline mods? Shifter etc? Added Elite Engineering tunnel plate
Any paint/body work/blemishes? Paint was show quality job done in 2002 and has minor road chips that would occur in about 8,000 miles of driving
Do the side bolster bladders in the sport seats work? On both sides? FRC had manual passenger seat so assuming it maybe only works driver side? Sport seats are powered on both sides, all electrical functions except bolster bladders function, memory functions
Have the FRC seats? No
Did you use the Z06 template the measure and cut for the ducts? Is it my eye or are they a little closer to the door gap than a Z06? Yes, used the Z06 template to install the ducts, both front and rear are fully functional
Thanks for asking... GUSTO
The following users liked this post:
RapidC84B (10-24-2017)
#49
So was the car originally Nassau Blue? Why the repaint?
#50
Le Mans Master
Thread Starter
The car left the factory black, but the folks I bought it from owned a restoration shop and decided that they had too many black vehicles. They like Nassau Blue and decided to paint it Nassau Blue. The paint jobs they do are all show quality. It was painted in 2002 and still looks outstanding.
GUSTO
GUSTO
#51
Le Mans Master
Thread Starter
Additional Photos
Some folks had asked for some additional photos and I was just able to take some high quality shots today.
GUSTO
GUSTO
Last edited by GUSTO14; 11-02-2017 at 02:54 PM.
#52
Le Mans Master
Thread Starter
Some additional photos...
GUSTO
GUSTO
#53
Le Mans Master
Thread Starter
Additional photos...
GUSTO
GUSTO
#54
Le Mans Master
Thread Starter
Additional photos...
GUSTO
GUSTO
#56
Le Mans Master
Thread Starter
#58
Le Mans Master
Thread Starter
To The Top...
#60
Le Mans Master
Thread Starter