WTB: C5 roller, Targa or FRC, projects ok
#1
Advanced
Thread Starter
C5 roller, Targa or FRC, projects ok
I'm looking for a C5 roller to build, any year coupe or FRC. Z06 is not a necessity. Nassau blue is my favorite, but I'm open to others. Preferably, black interior and manual. But I'm open to any options, missing or present. The more there, the better. My location is north MS, but will travel for a good car. Price depends on the car, but needs to be under $5k.
Thanks for your time!
Thanks for your time!
Last edited by uknomoose; 01-19-2019 at 05:36 PM.
#2
Le Mans Master
I can’t get near your $5k with my Nassau blue roller, but if you want a 6spd roller black interior race car. I have one I’m parting out.
The car can be bought with any array of parts still on it.
1998 Corvette
Nassau Blue
Black interior
Targa coupe
99k miles
clean title no accidents
Highly modified well documented race car built by Tony’s Corvettes out of Maryland.
NO MOTOR******
Fuel system:
Lingenfelter in-tank pump
Crimped AN Line’s
Fast fuel rails
Aeromotive fuel pressure regulator with gauge
60lbs injectors
Passenger OEM side fuel tank deleted
Driveline:
RPS BC2 Billet clutch
Bell-housing blow proof blanket
1000hp driveshaft
RPM MM6 transmission Faceplated 30 spline mainshaft
RPM rear diff with 3.90 gears, hardened shafts and Quaife 30 spline Differential
DSS axles
Short throw shifter with Nassau blue billet shift ****
Suspension:
Pfadt coil overs rear
Afco dual adj front coil overs harlancoil springs
TRZ tubular chromoly front K-member with spherical rod ends
TRZ Manual steering rack
Pfadt engine mounts
Pfadt rear diff mount
Brakes:
Strange front race brake calipers/rotors
Stock c5 rear brake setup
W/stock rear emergency brake setup
Steel brake lines
ABS delete
Brake proportioning valve
Still hydraulic brakes
Safety:
8.50 Cert Chromoly custom roll cage by Autocraft race cars
Window net
Fire suppression system, interior and engine bay
Push to off battery kill switch
RSJ cam-lock belts with anti-submarine belts
Kirkey Race seats (2)
Quick release steering wheel
CCW black Classic wheels 16x5 front runners with bias ply tires
16x10 rear with 28x11.5x16 Hoosier QT pros
Rears are drilled and bolted
Have black center caps for fronts as well as the silver spindle centers on fronts currently
Misc: car has been lightened up with no A/C components, heat, stereo speakers, head unit is there esthetically, pop up headlight assemblies removed, wipers and wiper motors removed, windshield washer bottle removed
The car has all working lights minus headlights, has LED fog lights for low light situations. The power locks, power windows, power hatch release all work, including turn signals and brake lights. The car is in good condition over all with no accident history. Just a man with an empty wallet and his toy that got out of hand over 14years of ownership.
The cage and belts will need recertified.
I’m sure I’m forgetting several upgrades details about the car. One mans loss another mans gain.
See this thread for pricing https://www.corvetteforum.com/forums...ler-in-pa.html.
The car can be bought with any array of parts still on it.
1998 Corvette
Nassau Blue
Black interior
Targa coupe
99k miles
clean title no accidents
Highly modified well documented race car built by Tony’s Corvettes out of Maryland.
NO MOTOR******
Fuel system:
Lingenfelter in-tank pump
Crimped AN Line’s
Fast fuel rails
Aeromotive fuel pressure regulator with gauge
60lbs injectors
Passenger OEM side fuel tank deleted
Driveline:
RPS BC2 Billet clutch
Bell-housing blow proof blanket
1000hp driveshaft
RPM MM6 transmission Faceplated 30 spline mainshaft
RPM rear diff with 3.90 gears, hardened shafts and Quaife 30 spline Differential
DSS axles
Short throw shifter with Nassau blue billet shift ****
Suspension:
Pfadt coil overs rear
Afco dual adj front coil overs harlancoil springs
TRZ tubular chromoly front K-member with spherical rod ends
TRZ Manual steering rack
Pfadt engine mounts
Pfadt rear diff mount
Brakes:
Strange front race brake calipers/rotors
Stock c5 rear brake setup
W/stock rear emergency brake setup
Steel brake lines
ABS delete
Brake proportioning valve
Still hydraulic brakes
Safety:
8.50 Cert Chromoly custom roll cage by Autocraft race cars
Window net
Fire suppression system, interior and engine bay
Push to off battery kill switch
RSJ cam-lock belts with anti-submarine belts
Kirkey Race seats (2)
Quick release steering wheel
CCW black Classic wheels 16x5 front runners with bias ply tires
16x10 rear with 28x11.5x16 Hoosier QT pros
Rears are drilled and bolted
Have black center caps for fronts as well as the silver spindle centers on fronts currently
Misc: car has been lightened up with no A/C components, heat, stereo speakers, head unit is there esthetically, pop up headlight assemblies removed, wipers and wiper motors removed, windshield washer bottle removed
The car has all working lights minus headlights, has LED fog lights for low light situations. The power locks, power windows, power hatch release all work, including turn signals and brake lights. The car is in good condition over all with no accident history. Just a man with an empty wallet and his toy that got out of hand over 14years of ownership.
The cage and belts will need recertified.
I’m sure I’m forgetting several upgrades details about the car. One mans loss another mans gain.
See this thread for pricing https://www.corvetteforum.com/forums...ler-in-pa.html.
Last edited by Vetteman Jack; 04-16-2019 at 12:08 AM.
#3
Advanced
Thread Starter
Whew! That is a helluva car. Lots of goodies under the skin. Thank you, for letting me know about it! But, you're right, it's too nice for me. I'm looking for something closer to a "beater" needing a new motor or trans, or a decent car with the motor/trans removed. Something I can make into a fun daily.