Boost-A -Pump install question

Reply Subscribe

Thread Tools

Search this Thread

Jan 21, 2006 | 07:59 AM

Mike04

Thread Starter

Safety Car

Joined: Jun 2004

Posts: 4,353

Likes: 22

From: Bella Vista Ca

Boost-A -Pump install question

Where is the best place to place the KB Boost-A-Pump Vacuum/Pressure switch on SC car. Picture would be great.

Jan 21, 2006 | 10:21 AM

leojnknsC5

Melting Slicks

Joined: Sep 2005

Posts: 3,082

Likes: 0

From: eagle mountain utah

vacuum line

There is a vacuum line on my 04 that runs from the MAP sensor on the back of the intake manifold and passes by the brake resorvior and then to the front of the engine. I used a block in the line that has several threaded openings in it. You can't reach around to the MAP sensor so if you have more than one line, you may have to cut it and see if theres vacuum when engine is running. Its also a good source for a vacuum/boost gause hookup.

Last edited by leojnknsC5; Jan 21, 2006 at 10:24 AM.

Jan 21, 2006 | 11:35 AM

muncie21

Melting Slicks

Joined: Mar 2005

Posts: 2,252

Likes: 181

From: NE OH

If you have a Maggie, there's a port available on the left (driver's side) of the blower. In the picture below, you can see the BAP pressure switch in the upper left of the picture.

Jan 21, 2006 | 01:27 PM