silicone couplers
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,285
Likes: 2
From: Crooks SD
silicone couplers
I need to get one of the 2" couplers to slide off the joints between pipes, but it won't budge. I've twisted the coupler with a large pliers, but I can't get it to slide off the pipes.
Anyone have any secrets?
Anyone have any secrets?
Supporting Vendor
Joined: Jul 2003
Posts: 6,486
Likes: 2
From: http://www.mphparts.com 800-364-1975
Originally Posted by Jesse_Boyer
I need to get one of the 2" couplers to slide off the joints between pipes, but it won't budge. I've twisted the coupler with a large pliers, but I can't get it to slide off the pipes.
Anyone have any secrets?
Anyone have any secrets?
Melting Slicks
Joined: Jan 2003
Posts: 3,251
Likes: 4
pinch it close to the end of the pipe with your hand to break the seal. Also what he said with the screwdriver. Just work your way around until it's mostly free then give it a twist and it will come off. You can lift a little with the screwdriver but not too much to pierce the coupler. Don't be timmid, you'll get a feel for it when you get started.
good luck
good luck
