150 shot
Thread Starter
Burning Brakes
Joined: Oct 2005
Posts: 1,020
Likes: 18
From: Anderson SC
150 shot
Just bought a TNT nitrous setup. Gonna spray 150 shot. Is it safe or do I need to upgrade fuel pump? Also, want to add cam so which one will give me the best performance for a stock LS1 on nitrous?
Melting Slicks
Joined: Jun 2004
Posts: 2,836
Likes: 110
From: El Paso TX.
if this is a TNT wet kit your injectors will be fine. however, i would not go a 150 shot without a fuel pump or a boost a pump. cam selection for spary is not that crucial on anything less than a 200 shot. there are quiet a few cams out there that do great NA and on the jug; g5x2, g5x3, g5x4, magic stick, etc. be very leary on who you get advise from on the internet. alot of people have not clue what they are saying and will give out wrong information. hope this helps. 
Last edited by algZO6; Mar 5, 2006 at 10:06 PM.
Collections Hold
Joined: May 2003
Posts: 3,520
Likes: 2
From: Tacoma WA
Our pumps are generaly good for 550hp and some going to 600plus. Without a pressure gauge it would be hard to gurantee the condition of your pump. Some things to do for a better stock pump, hot wire kit, return at rails regulator, a booster pump. Then if that's not enough a new replacement pump is the next step. I have run 150 shot on stock pump and it was enough, but you'll have to make that judgement call for your set-up. 
Robert
Robert
