408 + D1sc ???
Thread Starter
Burning Brakes
Joined: Mar 2005
Posts: 1,096
Likes: 1
From: Murfreesboro TN
408 + D1sc ???
I'm just dying to know so here's the question..........What numbers should i expect from a built 408 and a D1sc ( 8 rib pulley set up )with a single intercooler all this with a 3.6 pulley and all the supporting mods ? my car is and auto with 3.42 gears and a 2800 stall
my previous set up was everything a got now minus the 408 .the car had a built motor and put mid 600 rwhp
my previous set up was everything a got now minus the 408 .the car had a built motor and put mid 600 rwhp
Last edited by Slovette2000; Mar 5, 2006 at 08:23 PM.
Melting Slicks
Joined: Aug 2003
Posts: 2,145
Likes: 3
From: Ft. Worth TX
We'll cut you some slack since it is on the 2nd page, but sometimes the search button can be your friend. 
http://forums.corvetteforum.com/show...53&forum_id=86
I think you'll be easily in the 700's.
http://forums.corvetteforum.com/show...53&forum_id=86
I think you'll be easily in the 700's.
Thread Starter
Burning Brakes
Joined: Mar 2005
Posts: 1,096
Likes: 1
From: Murfreesboro TN
Originally Posted by WrEcKeD1101
We'll cut you some slack since it is on the 2nd page, but sometimes the search button can be your friend.
http://forums.corvetteforum.com/show...53&forum_id=86
I think you'll be easily in the 700's.
http://forums.corvetteforum.com/show...53&forum_id=86
I think you'll be easily in the 700's.
sorry
Drifting
Joined: Nov 2002
Posts: 1,354
Likes: 4
From: Edmond OK
Originally Posted by WrEcKeD1101
It's all good and it'll be even better with the new motor. I can't wait for mine to get finished as well!
What clutch are you running, out of curiosity?
What clutch are you running, out of curiosity?
"my car is and auto with 3.42 gears and a 2800 stall "
