meth/alky kit.
Instructor
Joined: Jun 2006
Posts: 220
Likes: 1
From: East Windsor NJ
I have an ECS kit in mine.
I saw an article in HotRod a while back talking about a kit from Snow Performance. They used a BoostCooler with something called SafeInjection that activated the blow-off valve if there was not enough juice to cool the charge.
My Alky setup is just for extra safety and can run without it, if someone was going to run enough boost that Alky is required to run the motor, this would be a good feature. Knowing ECS, if someone wanted this feature, they would have a way to provide it.
The part numbers listed for Snow were: Stage 2 Boost Cooler PN 20010, SafeInjection PN 30010, Blowoff valve upgrade PN 30030.
I saw an article in HotRod a while back talking about a kit from Snow Performance. They used a BoostCooler with something called SafeInjection that activated the blow-off valve if there was not enough juice to cool the charge.
My Alky setup is just for extra safety and can run without it, if someone was going to run enough boost that Alky is required to run the motor, this would be a good feature. Knowing ECS, if someone wanted this feature, they would have a way to provide it.
The part numbers listed for Snow were: Stage 2 Boost Cooler PN 20010, SafeInjection PN 30010, Blowoff valve upgrade PN 30030.
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Give us a call. We can get one right out for you. 
__________________
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
