Spray it up! Sweet install man! I will post pics & dyno results once mine is completed.
Nitrous Picture Thread
Thread Starter
Former Vendor
Joined: Nov 2000
Posts: 14,057
Likes: 1
From: Houston Texas
Nitrous Picture Thread
The Maggie picture thread was a big success so I thought I would start one for the guys with nitrous systems. If you post pics we would like to see the installations, bottle mounts, gauges, pillar pods, purge levers, other buttons and controls, and a description of your system for guys like me that aren't very familiar with nitrous. No one has to do all of the above, just post what you have. It would be helpful to tell us what system you have.
Thanks!
Thanks!
Last edited by Navy Blue; Feb 23, 2008 at 03:23 AM.
Drifting
Joined: Sep 2005
Posts: 1,258
Likes: 0
From: Home Southern Maine
St. Jude Donor '08
Two Stage, being a Dry (dual nozzle to Blackwing), and a Wet Nitrous Outlet Plate system (just behind the throttlebody).
Here is the Wet System, Nitrous noid far Left, Fuel Noid on the rail. Off the Fuel Noid, is a FPSS and a Autometer Fuel Pressure Sending unit.
Dry System is lower right, the first Noid to the right, with the -4AN line going to a -4AN "Y" going to dual Nozzles in the Blackwing.
Gauges, I had two Dynotune gauges, one a bottle pressure, the other Wideband, I have since updated to a Trick Performance combo Gauge, and a custom gauge that indicates when the Stages are active.
Origional Setup
Current Setup
Control Panel is custom made by me
I am reconfiguring the bottle area, I have upgraded to a NANO.
Here is a shot of the origional bottle install (animated let load)
Here is the Wet System, Nitrous noid far Left, Fuel Noid on the rail. Off the Fuel Noid, is a FPSS and a Autometer Fuel Pressure Sending unit.
Dry System is lower right, the first Noid to the right, with the -4AN line going to a -4AN "Y" going to dual Nozzles in the Blackwing.
Gauges, I had two Dynotune gauges, one a bottle pressure, the other Wideband, I have since updated to a Trick Performance combo Gauge, and a custom gauge that indicates when the Stages are active.
Origional Setup
Current Setup
Control Panel is custom made by me
I am reconfiguring the bottle area, I have upgraded to a NANO.
Here is a shot of the origional bottle install (animated let load)
Last edited by Beer99C5@FastbirdPerf.com; Feb 23, 2008 at 10:11 AM.
Pro
Joined: Nov 2002
Posts: 722
Likes: 0
From: ********************* Florida's Space Coast *********************
Getting ready to pull my NX DP system off, but here is a few pics of the system as it is now...
Here was the single nozzle system that I ran for a year:
Soon to be Supercharged... Very soon!
Here was the single nozzle system that I ran for a year:
Soon to be Supercharged... Very soon!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Apr 2001
Posts: 5,941
Likes: 281
From: Was New Orleans but swam to Baton Rouge LA
Cruise-In IX Veteran
simple but it works
