Dr. Phil is da man
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 886
Likes: 0
From: Tn
Dr. Phil is da man
I know everyone already knows this but he really is. I just got back from picking my car up in Michigan and drove to Nashville Tn with not a single problem on my new TTIx setup. The car has a 2 bar SD tune. The car runs smooth as silk and sounds great. Left my same 408 iron block, same 6liter heads, and cam (not a turbo cam or supercharger cam) in and the car put down 625rwhp 619rwtq on 10lbs through the auto and 778rwhp and 795rwtq i think on 15lbs pump gas i couldnt be happier
going to the track on the 11th and gonna give it my best. Thanks again Phil for an awesome job and making it fun again
going to the track on the 11th and gonna give it my best. Thanks again Phil for an awesome job and making it fun again
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 886
Likes: 0
From: Tn
. His knowledge is impressive. I think i almost talked him to death lol
. I cant get over how smooth car the runs yet in boost its brutal even on low boost
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 886
Likes: 0
From: Tn
the car is fun to drive once again with out the headaches of worrying. The tune is like butter smooth too heck i started to just keep driving lol but after 10 hrs i brought her home lol
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 886
Likes: 0
From: Tn
I like it alot. Gonna go wash and wax it now
I wish he was closer but then i would probably get on his nerves bugging him lol
Le Mans Master
Joined: Sep 2001
Posts: 8,840
Likes: 43
From: State of Confusion.
Drifting
Joined: May 2004
Posts: 1,904
Likes: 2
From: London(UK)/Troyes(France)
Congrats on your car, it must be sick! I am sure turbos are awesome. Phil is the BEST! He is tuning my car. I am having issues after issues after issues with my car (mechanical problems due to idiots here who can't work on a Vette) 
and he is always there to help me out. He tuned my car, a 408 with a P1SC. The cam is a 238/242 on 115 LSA. The car drives like stock. I am serious. You can just here the cam lope but basically, you can daily drive the car. Phil is awesome.
PS Thanks again Phil, as you said, I will be back in a few weeks ... hopefully a little earlier
and he is always there to help me out. He tuned my car, a 408 with a P1SC. The cam is a 238/242 on 115 LSA. The car drives like stock. I am serious. You can just here the cam lope but basically, you can daily drive the car. Phil is awesome. PS Thanks again Phil, as you said, I will be back in a few weeks ... hopefully a little earlier
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 886
Likes: 0
From: Tn
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 886
Likes: 0
From: Tn
Congrats on your car, it must be sick! I am sure turbos are awesome. Phil is the BEST! He is tuning my car. I am having issues after issues after issues with my car (mechanical problems due to idiots here who can't work on a Vette) and he is always there to help me out. He tuned my car, a 408 with a P1SC. The cam is a 238/242 on 115 LSA. The car drives like stock. I am serious. You can just here the cam lope but basically, you can daily drive the car. Phil is awesome.
PS Thanks again Phil, as you said, I will be back in a few weeks ... hopefully a little earlier
and he is always there to help me out. He tuned my car, a 408 with a P1SC. The cam is a 238/242 on 115 LSA. The car drives like stock. I am serious. You can just here the cam lope but basically, you can daily drive the car. Phil is awesome. PS Thanks again Phil, as you said, I will be back in a few weeks ... hopefully a little earlier
Melting Slicks
Joined: Oct 2005
Posts: 2,184
Likes: 2
From: Los Angeles Ca
Congrats on your build with Dr. Phil! Good luck with track times and all you end up doing with your car. Phil sent my car back to me in March and I have had NOT ONE issue with it!!!! I'm very happy with the build and I'm sure you will be as well.
Melting Slicks
Joined: Mar 2003
Posts: 3,116
Likes: 10
From: Macomb MI
I can believe you drove straight home, specially with all the scenic touring you did around here!
.
Keep the shiny side up and enjoy it.
Phil
PS To the rest of you, thanks for the kind words, you have all been placed on the ignore list
.
.Keep the shiny side up and enjoy it.
Phil
PS To the rest of you, thanks for the kind words, you have all been placed on the ignore list
.
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 886
Likes: 0
From: Tn
Thanks again Phil. Your top notch. Yeah I sucked at following your directions on getting home, but I enjoyed every mile home LOL