Write Up Alert: FLIP-DRIVE Install Complete W/Pictures
#61
Team Owner
Thread Starter
Bump for a friend installing his this weekend!
Thanks,Matt
Thanks,Matt
#63
Team Owner
Thread Starter
Was asked the question: What size are the fittings and the Line between them that replaces the stock line?
It's a -6 AN Line between the two fittings.
PNs are:
FCM2608 = -6AN x 18M x 1.5 http://aeroquip.cc/fcm2609fbm2609-06xm18x15.aspx
FCM2609 = -6AN x 18M x 1.5 http://aeroquip.cc/fcm2608fbm2608-06xm16x15.aspx
Thanks,Matt
It's a -6 AN Line between the two fittings.
PNs are:
FCM2608 = -6AN x 18M x 1.5 http://aeroquip.cc/fcm2609fbm2609-06xm18x15.aspx
FCM2609 = -6AN x 18M x 1.5 http://aeroquip.cc/fcm2608fbm2608-06xm16x15.aspx
Thanks,Matt
#64
Melting Slicks
#66
Need to bump up this thread.
I just installed one of these Flip Drives and the A/C belt was too short. (47.6")
I used this thread for reference in obtaining a 49" belt which is the perfect length as the OP stated.
This thread proved to be helpful.
I just installed one of these Flip Drives and the A/C belt was too short. (47.6")
I used this thread for reference in obtaining a 49" belt which is the perfect length as the OP stated.
This thread proved to be helpful.
Last edited by Rayhawk; 07-04-2013 at 12:41 PM.
#67
Team Owner
Thread Starter
#69
hate to bring up an old thread but i need to know how long the braided power steering line is. I bought a used kit and i don't have the line, the fittings, or the alternator tensioner. I'm trying to piece it together. Thanks!
#70
Team Owner
Thread Starter
Any missing pieces they will have -
I do have the old style Alternator Tensioner if you are interested - I upgraded to the newer style they have
Thanks,Matt
#71
Team Owner
I ordered an upgraded, correct-length PS line from Dallas performance to replace the line that came with my A&Asecondary drive because that one was slightly short and it would have been a challenge to make it work. The DP line is a bit longer and fits nicely. I called them and ordered it over the phone.
#74
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,261 Likes
on
1,056 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
dallas performance is an awesome shop and great guys to deal with... they were able to help me a few times with some small parts and fab work to get my car where it is now and if you ever have an opportunity to see the type of cars they are working on but yet are still willing to stop and help out with small stuff then it makes you realize what kind of people they are... to my knowledge they aren't working on vettes anymore but should still be able to get you the part(s) you need