Considering selling partial blower kit
Thread Starter
Melting Slicks
Joined: May 2004
Posts: 2,103
Likes: 4
From: Oakley CA
Considering selling partial blower kit
Hey guys, I am considering selling a partial blower kit that I have. Not 100% that I am going to sell it but I wanted to give the FI crowd first shot at it.
The kit consists of ECS C5 intercooler (the big one) with radiator cradle, all charge pipes and inlet pipes for the blower. Radiator top shroud, and silicone couplers.
To complete the kit you would need a blower, bracket, pinning kit, a bypass valve, and some kind of fuel upgrade (injectors, pump, or BAP)
Is it worth $1,000?
The kit consists of ECS C5 intercooler (the big one) with radiator cradle, all charge pipes and inlet pipes for the blower. Radiator top shroud, and silicone couplers.
To complete the kit you would need a blower, bracket, pinning kit, a bypass valve, and some kind of fuel upgrade (injectors, pump, or BAP)
Is it worth $1,000?
Drifting
Joined: Jan 2005
Posts: 1,724
Likes: 0
From: Oil Country
I sold my A&A single FMIC, hard piping with filter, most tubing, rad shrouding and top plate, modified rad cradle, bov vacuum hose, blower belt and the actual blower bracket for $1000 shipped from Canada to Michigan. I would think anywhere from $800 to $1000 for your parts would be reasonable.
In any case, good luck if you decide to sell and the parts should sell quickly!
In any case, good luck if you decide to sell and the parts should sell quickly!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Pro
Joined: Dec 2008
Posts: 513
Likes: 0
From: Essexville MICH
I sold my A&A single FMIC, hard piping with filter, most tubing, rad shrouding and top plate, modified rad cradle, bov vacuum hose, blower belt and the actual blower bracket for $1000 shipped from Canada to Michigan. I would think anywhere from $800 to $1000 for your parts would be reasonable.
In any case, good luck if you decide to sell and the parts should sell quickly!
In any case, good luck if you decide to sell and the parts should sell quickly!
