A&A Corvette Performance:Forced Induction Q&A thread
#801
Instructor
Member Since: Sep 2011
Location: Austin Tx
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Going Forged
LS6Guys i have your V2 going to Arun Jam Cam Stage 3, LT, 3.4 pulley, and Alky. My goal is 700 rwhp. Its not a track car more street. Do I need
a http://www.jegs.com/i/JEGS-Performan...ductId=1679269 any other items that i would need to accomplish my goal?
a http://www.jegs.com/i/JEGS-Performan...ductId=1679269 any other items that i would need to accomplish my goal?
#803
Instructor
Member Since: Sep 2011
Location: Austin Tx
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
#804
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
I got that one too after my stock one fell apart about 5 minutes after the SC install, lol
#806
Platinum Supporting Vendor
LS6Guys i have your V2 going to Arun Jam Cam Stage 3, LT, 3.4 pulley, and Alky. My goal is 700 rwhp. Its not a track car more street. Do I need
a http://www.jegs.com/i/JEGS-Performan...ductId=1679269 any other items that i would need to accomplish my goal?
a http://www.jegs.com/i/JEGS-Performan...ductId=1679269 any other items that i would need to accomplish my goal?
If you have the older 1pc bracket then it will clear.
I usually just have guys run the C2501 which is SFI-spec and stock diameter, and sticks out the same distance as a stock 6-rib balancer. You should still be able to make your 700rwhp goal with that and a 3.4" since you have cam, LTs and meth going on it.
#807
Drifting
LS6Guys i have your V2 going to Arun Jam Cam Stage 3, LT, 3.4 pulley, and Alky. My goal is 700 rwhp. Its not a track car more street. Do I need
a http://www.jegs.com/i/JEGS-Performan...ductId=1679269 any other items that i would need to accomplish my goal?
a http://www.jegs.com/i/JEGS-Performan...ductId=1679269 any other items that i would need to accomplish my goal?
#809
Platinum Supporting Vendor
Any BOV could be adapted. I'd need to see a pic of it. You might be better off using their alum flange and have it welded directly to the alum tube that comes in our kit.
#810
Race Director
My dyno sheet does not show how much boost I am running, and I bought the car with the kit already installed. How much boost do you think I am running? 1999. Stock ls1, auto, 469hp at the wheels. Will the stock ls1 hold 500rwhp?
Thanks
Thanks
#811
Platinum Supporting Vendor
A '99 LS1 kit would usually come with a 3.6" pulley and make about 9-10#s, but you might only have a 3.8" pulley since the power is below 500rwhp. Or maybe it was on a Mustang Dyno so the numbers are about 40rwhp lower than a Dynojet. Stock LS1's on pump gas run 550rwhp on a daily basis. But refer to whomever will do the Tuning to make sure they are comfortable pushing for more power on your setup.
#812
Race Director
A '99 LS1 kit would usually come with a 3.6" pulley and make about 9-10#s, but you might only have a 3.8" pulley since the power is below 500rwhp. Or maybe it was on a Mustang Dyno so the numbers are about 40rwhp lower than a Dynojet. Stock LS1's on pump gas run 550rwhp on a daily basis. But refer to whomever will do the Tuning to make sure they are comfortable pushing for more power on your setup.
Thanks again!
#813
Platinum Supporting Vendor
Swap to 3.6" pulley and shorter belt K060905HD and re-tune to make the 500rwhp
The following users liked this post:
meadowz06 (09-21-2015)
#814
Race Director
#815
Drifting
My goodness Josh
You are absolutely bombarded with questions, left and right, day after day. I guess its the price of being famous... A&A kits Rock
Hey, I'm upgrading my 05 heads Cam intake exhaust 05 LS2 that has an existing ECS Blower SC1500 with BAP making 650 WHP to a new A&A YSI 6 Rib kit. Looking to push more towards 750whp on an otherwise stock bottom end with upgraded trans and diff. Using Coilovers so as to avoid wheel hop as well.
I know its risky, but I've been wanting to build a new motor anyways, so if it goes in a few weeks/months, so be it....
My questions as listed in the Forced Induction section as well are:
Will t)3 installled Kenne Bell BAP suffice at 750whp or is a complete fuel system required
Will the 60lb injectors supplied with the ECS handle the amount of fuel
Being that I do not run meth now, will it be required?
Please and thanks, have a great day!
Keith
Hey, I'm upgrading my 05 heads Cam intake exhaust 05 LS2 that has an existing ECS Blower SC1500 with BAP making 650 WHP to a new A&A YSI 6 Rib kit. Looking to push more towards 750whp on an otherwise stock bottom end with upgraded trans and diff. Using Coilovers so as to avoid wheel hop as well.
I know its risky, but I've been wanting to build a new motor anyways, so if it goes in a few weeks/months, so be it....
My questions as listed in the Forced Induction section as well are:
Will t)3 installled Kenne Bell BAP suffice at 750whp or is a complete fuel system required
Will the 60lb injectors supplied with the ECS handle the amount of fuel
Being that I do not run meth now, will it be required?
Please and thanks, have a great day!
Keith
#816
Platinum Supporting Vendor
You are absolutely bombarded with questions, left and right, day after day. I guess its the price of being famous... A&A kits Rock
Hey, I'm upgrading my 05 heads Cam intake exhaust 05 LS2 that has an existing ECS Blower SC1500 with BAP making 650 WHP to a new A&A YSI 6 Rib kit. Looking to push more towards 750whp on an otherwise stock bottom end with upgraded trans and diff. Using Coilovers so as to avoid wheel hop as well.
I know its risky, but I've been wanting to build a new motor anyways, so if it goes in a few weeks/months, so be it....
My questions as listed in the Forced Induction section as well are:
Will t)3 installled Kenne Bell BAP suffice at 750whp or is a complete fuel system required
Will the 60lb injectors supplied with the ECS handle the amount of fuel
Being that I do not run meth now, will it be required?
Please and thanks, have a great day!
Keith
Hey, I'm upgrading my 05 heads Cam intake exhaust 05 LS2 that has an existing ECS Blower SC1500 with BAP making 650 WHP to a new A&A YSI 6 Rib kit. Looking to push more towards 750whp on an otherwise stock bottom end with upgraded trans and diff. Using Coilovers so as to avoid wheel hop as well.
I know its risky, but I've been wanting to build a new motor anyways, so if it goes in a few weeks/months, so be it....
My questions as listed in the Forced Induction section as well are:
Will t)3 installled Kenne Bell BAP suffice at 750whp or is a complete fuel system required
Will the 60lb injectors supplied with the ECS handle the amount of fuel
Being that I do not run meth now, will it be required?
Please and thanks, have a great day!
Keith
If you and your Tuner don't mind the risk it can be done.
I'd run our external single or twin pump fuel system and not expect just a BAP to go that far. With our good external fuel system you can probably still make the goal using the 60# injectors, but if the budget allows go ahead and step up to 80#s during the Ysi install.
AlkyControl meth kit will be a must have to keep the stock pistons alive with that much power. You will need to tune it meth dependent to get all the octane you can for pushing it that hard.
Sneak-up on the tune and be careful and it will be a monster at the end.
Feel free to email me for further questions or pricing. Josh@aacorvette.com
#817
Race Director
So I have a Gen 2 bracket and you know that bolt that is reversed thread to help tighten down the tensioner. I broke that bolt is that something I can get at ace hardware or need to order through you guys?
#818
Platinum Supporting Vendor
Either call me at the shop to order or use prybar to push the slide tensioner over to tighten the belt.
#820
Hey Josh….. Spoke with you last week about the bap issues and ordered a new bap. It came in and we installed it. Its still blowing the fuse. Looks like the fuel ⛽ pump is shorting out. So my question ❔ is what fuel ⛽ pump should I get? Keeping in mind that I am still going with a bap setup. Its a 2004 z06 with forged ls6, v3, 13lbs of boost and 99.99 meth injected. I believe its 650 rwhp.