427 YSI Build (Texas Chainsaw Massacre)
#1
Melting Slicks
Thread Starter
427 YSI Build (Texas Chainsaw Massacre)
Well guys I have been gathering parts for a few months now. Finally got nearly everything together thanks to Arun@CCP. After all the success that Arun has had with the YSI kit from A and A I decided to go that rout. Also Arun advised me to go 10rib. So I went with a Inovative west 10 rib crank pulley and CCP's 10 rib conversion, 2 inch Kooks headers and CCP's Blower radiator. The snow really set things back with shipping but finally Fedex showed up with a big box. Well again I want to thank Arun and Bret for helping me decide and for their wealth of knowledge. Crank pulley is already on motor and rack spaced forward, oil pan drilled and tapped. So for most part hard work is done. With this build I am shooting for 900rwh plus 9.0s in 1/4. Here are some specs on motor.
03 Z
427 Darton wet sleeved
ETP 255 heads
CCP custom blower cam (Big)
RPM 4L65 conversion
Here are some pics
A and A's ram air intercooler
I have a 10 rib blower pulley just not in pic.
Blower mocked up
03 Z
427 Darton wet sleeved
ETP 255 heads
CCP custom blower cam (Big)
RPM 4L65 conversion
Here are some pics
A and A's ram air intercooler
I have a 10 rib blower pulley just not in pic.
Blower mocked up
#3
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
About time man glad to see you are up and going on this. The # I am sure you will hit with no problem....
Last edited by robert miller; 02-13-2011 at 10:24 PM.
#4
Tech Contributor
Shane, I can't wait to see you roll down the track with this setup buddy. You'll be posting up the best times you have ever posted to date. I promise!
Is that Doc's motor you have the blower hanging on?
#5
Melting Slicks
Thread Starter
Mock up motor for this type of stuff. Elbow and intake are mine tho. Robert just pmed me with his new numbers with the 3.0 pulley all I can say is WOW.
#6
Former Vendor
Thanks for the kind words guys-I'm guessing this is gonna cost me lot of Papa John's, Whitecastle Burgers and Dos Equis at Z06Fest this year
Looking forward to seeing how this build progresses bro-believe me, it's gonna be trouble free compared to the Kenne Bell Hell you had to deal with.
I'm guessing your serving notice to the Arkansas Street Car class-by massacreing it?
Looking forward to seeing how this build progresses bro-believe me, it's gonna be trouble free compared to the Kenne Bell Hell you had to deal with.
I'm guessing your serving notice to the Arkansas Street Car class-by massacreing it?
#7
Melting Slicks
That's going to be a sweet combo! I'm not sure if it was you or not, but didn't you have a kenne bell set up and then switched out to a ttix kit? Anyways, your current build will spit out low 9 sec passes no problem
#9
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
Thanks for the kind words guys-I'm guessing this is gonna cost me lot of Papa John's, Whitecastle Burgers and Dos Equis at Z06Fest this year
Looking forward to seeing how this build progresses bro-believe me, it's gonna be trouble free compared to the Kenne Bell Hell you had to deal with.
I'm guessing your serving notice to the Arkansas Street Car class-by massacreing it?
Looking forward to seeing how this build progresses bro-believe me, it's gonna be trouble free compared to the Kenne Bell Hell you had to deal with.
I'm guessing your serving notice to the Arkansas Street Car class-by massacreing it?
#10
Former Vendor
Robert buddy you have to blame Bret for the gas war-he bought the Whitecastle burgers-they call them sliders for a reason-lol!!!!
#12
Tech Contributor
#13
Melting Slicks
Thread Starter
Yes I had a KB and ttix kit. I am looking forward to trying this one out. I am going to Z06FEST THIS YEAR
#15
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
#16
Drifting
#17
Former Vendor
#18
Team Owner
Man that is awesome, I always wonder what arun would do for my Vette if he could get his hands on it
Or at least on his Dyno
That is going to be one serious MONSTER Can't wait to see more on the build
Thanks,Matt
Or at least on his Dyno
That is going to be one serious MONSTER Can't wait to see more on the build
Thanks,Matt
#19
Burning Brakes
Member Since: Sep 2005
Location: Temple TX
Posts: 1,218
Likes: 0
Received 0 Likes
on
0 Posts
Bout time you went over to the darkside brotha!
Don't count me out yet on Z06 fest this year fellas. Would love to be there again slamming whitecastle and brew like 2 years ago.
Don't count me out yet on Z06 fest this year fellas. Would love to be there again slamming whitecastle and brew like 2 years ago.
#20
Former Vendor