CCP Blower Cam kits!
Thread Starter
Former Vendor
Joined: Jul 2010
Posts: 4,504
Likes: 4
From: Waterloo Ontario
CCP Blower Cam kits!
We've been selling quite a few of our cams and we figured we put them in a kit to save you some time and money.
After years of testing different cams-we finally came up a few grinds that are designed with lobes that are stable and work great with boost. They have just enough lift that can be controlled with our springs and are easy on the valvetrain-perfect for a car that get's driven.
Our stage 1 cam is great for stock bottom ends, great daily driver cam, makes power right off idle to 7000 rpm. Slight lope and passes emissions.
Stage 2 is for max effort 347-364's and even great for 383's to 427's.
Has more of a lope but still a great daily driver cam.
Stage 3 is 8 second daily driver proven-has gone as fast as 160mph in the quarter-makes big power! 402 cubes and up is needed for this cam.
What were including is 1 of our proven cams,
Extreme Duty dual springs, Ti retainers, Seats, locks and seals
Comp Hi-tech pushrods,
All for $800,
Plus get free shipping this month!
Need a blower to go along with your cam-call us for the best prices on a A&A and ECS supercharger kits!
After years of testing different cams-we finally came up a few grinds that are designed with lobes that are stable and work great with boost. They have just enough lift that can be controlled with our springs and are easy on the valvetrain-perfect for a car that get's driven.
Our stage 1 cam is great for stock bottom ends, great daily driver cam, makes power right off idle to 7000 rpm. Slight lope and passes emissions.
Stage 2 is for max effort 347-364's and even great for 383's to 427's.
Has more of a lope but still a great daily driver cam.
Stage 3 is 8 second daily driver proven-has gone as fast as 160mph in the quarter-makes big power! 402 cubes and up is needed for this cam.
What were including is 1 of our proven cams,
Extreme Duty dual springs, Ti retainers, Seats, locks and seals
Comp Hi-tech pushrods,
All for $800,
Plus get free shipping this month!
Need a blower to go along with your cam-call us for the best prices on a A&A and ECS supercharger kits!
ISIS SUCKS FAT CHOAD
Joined: Oct 2008
Posts: 8,124
Likes: 53
From: Earth, United States
Arun, Sent ya an email buddy. Not for a cam but other stuff. 
10 rib stuff.
Hey guys Arun helped me with a cam for my build and well lets just say that even though my engine builder dont think I will like it, he did say that it is streetable and it will make tons of power. I think ill love it!
10 rib stuff. Hey guys Arun helped me with a cam for my build and well lets just say that even though my engine builder dont think I will like it, he did say that it is streetable and it will make tons of power. I think ill love it!
Team Owner
Joined: Jan 2007
Posts: 29,065
Likes: 1,839
From: cookeville tennessee
ttt
Arun, Getting parts together now for a new Iron 6.0 block build now. I have the new block and rods now is all. I am in need of a crank, cam, and ALL the other parts to make me up a short block. Give me a p.m. on a really good cam for a 408 build that will work good with a 2800 stall with the YSI unit.... Robert
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Team Owner
Joined: Jan 2007
Posts: 29,065
Likes: 1,839
From: cookeville tennessee
Melting Slicks
Joined: Oct 2003
Posts: 3,040
Likes: 47
From: El Dorado Hills CA
Interested in a cam kit. I will be installing a a&a v2 kit, ls6 intake, yank Ss3200 converter, and 3.42 in my 98 coupe. Need for everything to pass California emissions. Let me know what you recommend.
Thanks
Thanks
Thread Starter
Former Vendor
Joined: Jul 2010
Posts: 4,504
Likes: 4
From: Waterloo Ontario