Procharger HO Intercooler mounting question
Thread Starter
Melting Slicks
Joined: May 2007
Posts: 2,014
Likes: 48
From: Dayton Ohio
Procharger HO Intercooler mounting question
As most of you know from some of my other threads I purchased a used Procharger HO kit with some stage 2 options that were later added including the radiator cradle and a bracket which appears to be A&A V1.
Any tips or better pics than procharger manual for mounting these? Are they mounted straight up or at a slant?
My issue appears to be on the drivers side with the top of the intercooler contacting the headlight (Barely) but I havent really adjusted since I was missing 2 bolts and spacers. I will try again tonight and weds and I think I can get the proper clearance.
I did see the A&A kit had spacers on the cradle but the Procharger kit did not.
Also I believe this is an A&A V1 bracket correct?
Any tips are appreciated.
Love seeing this!
Build thread with pics here if interested http://forums.corvetteforum.com/c5-z...post1583516924
Any tips or better pics than procharger manual for mounting these? Are they mounted straight up or at a slant?
My issue appears to be on the drivers side with the top of the intercooler contacting the headlight (Barely) but I havent really adjusted since I was missing 2 bolts and spacers. I will try again tonight and weds and I think I can get the proper clearance.
I did see the A&A kit had spacers on the cradle but the Procharger kit did not.
Also I believe this is an A&A V1 bracket correct?
Any tips are appreciated.
Love seeing this!
Build thread with pics here if interested http://forums.corvetteforum.com/c5-z...post1583516924
