C5 Forced Induction/Nitrous C5 Corvette Turbochargers, Superchargers, Centrifugal, Twin Screw & Roots Blowers, Twin Turbo Kits, Intercoolers, Wet & Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

ttix plug gap and oil

Thread Tools
 
Search this Thread
 
Old Jul 25, 2013 | 11:15 AM
  #1  
willsy2kc5's Avatar
willsy2kc5
Thread Starter
Intermediate
 
Joined: May 2012
Posts: 25
Likes: 0
Default ttix plug gap and oil

About wrapped up with putting the ttix kit on! Needed some input on my spark plug gap on the tr6's. Shooting for around 15lbs or so. Also on motor oil to use and what weight! Thanks for any and all help guys!
Reply
Old Jul 25, 2013 | 12:02 PM
  #2  
Turbo-Geist's Avatar
Turbo-Geist
Melting Slicks
15 Year Member
All Eyes On Me
Photogenic
Liked
 
Joined: Jul 2008
Posts: 3,002
Likes: 216
From: Houston Texas
2018 Corvette of Year Finalist
2017 C5 of Year Finalist
Default

I think TR6 plugs are gapped at 0.035 or 0.040 out of the box. When I ran the TR6's I used 0.035. For oil, I like Shell Rotella T 15W40.
Reply
Old Jul 25, 2013 | 02:43 PM
  #3  
MVP'S ZO6's Avatar
MVP'S ZO6
ISIS SUCKS FAT CHOAD
Supporting Lifetime Gold
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2008
Posts: 8,124
Likes: 53
From: Earth, United States
Default

with starting or using the 0.035 gap. IMHO There's better plugs out there then the TR6's though.

As for engine oil I personally just use the good ole mobile 1. I'm not turbocharged though.
Reply
Old Jul 26, 2013 | 01:09 AM
  #4  
Chris Stewart's Avatar
Chris Stewart
Safety Car
25 Year Member
All Eyes On Me
Liked
Loved
 
Joined: Apr 2000
Posts: 4,326
Likes: 140
From: Weatherford, TX
Default

I run TR6 gapped at 30, up to 20psi, and Mobil1 5w30. Looking forward to hearing your results. Details on the build?
Reply

Get notified of new replies

To ttix plug gap and oil





All times are GMT -4. The time now is 03:22 PM.