idle vacuum reading on Boost gauge
#1
Drifting
Thread Starter
idle vacuum reading on Boost gauge
What should the idle vacuum reading be on my Cobalt boost gauge , (shows vac/Boost). shouldnt it be showing boost in WOT, or is it normal while in park and reving the motor to higher RPM's that the Vac gauge bounces to a higher vac, I was thinking there must be a leak in the tubing, or am I just being stupid...Thnks
I have a Maggie MP112 and Magna charger instructed me to hook my Boost gauge tubing to the port next to the booster pump line, it is the brass cap next to the Black tube going to the booster pump module.
Pic shown below,
I have a Maggie MP112 and Magna charger instructed me to hook my Boost gauge tubing to the port next to the booster pump line, it is the brass cap next to the Black tube going to the booster pump module.
Pic shown below,
Last edited by Pizzano; 01-28-2017 at 06:06 PM.
The following users liked this post:
MVP'S ZO6 (01-29-2017)
#3
Drifting
Thread Starter
Thanks Bud we will drive it tomorrow