mykream

I have the above combo as many do.. My plan was to run a single nozzle pre tb but I've always been curious if anyone still runs a plate with this setup? I know the 90mm nitrous plates won't work with the fast 102 since the lines interfere with the intake, so is there any downside to running the fast 102 plate with the smaller tb?

helga203

IMO zero effect. if your engine was starving for air with the 102 inlet then i would say don't do it. but 90mm inlet is way sufficient air for your set up. if you were 1300 or higher hp then you would need a 102 inlet. hope this helps.