When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Doing some "Upgrades" folks!
My Roadster is back at Andy's for it's seemingly continued metamorphosis. It all started with my decision to go with an 8-rib billet pulley setup and ATI Super Damper (from Nate @ Xtreme). Since the face of the motor is off anyway, we have decided to upgrade to the D1SC and a single intercooler setup. I never had any real problems with belt slippage or overheating, nevertheless the single intercooler setup looks "cleaner" with less hoses. On the dyno, I was getting a little bit of belt slip at 6500+ rpm (8 lbs boost). I believe once Andy is done I will have a real turn-key reliable S/C setup.
Should be within 3 weeks or so. :) I felt that holding onto cores that he needed back was unfair. So I am waiting until the car is back so I can have the parts removed and shipped back to him.