Complete Plug-N-Play C5 Corvette Nitrous System >>>>
Racer
Joined: Sep 2001
Posts: 274
Likes: 0
From: BayArea CA
Re: Complete Plug-N-Play C5 Corvette Nitrous System >>>> (Shinobi'sZ)
Yeah I really want to run a 10 second time on the stock F1's. People say it cant be done, but I think otherwise. But a bottle will put me that much closer. And from what ive heard the Z can take 100-150 shot with no problems? But only time will tell.
Sean
Sean
Melting Slicks
Joined: Oct 2001
Posts: 2,073
Likes: 4
From: Official Misfit Cooler Owner
Cruise-In III Veteran
Cruise-In IV Veteran
Re: Complete Plug-N-Play C5 Corvette Nitrous System >>>> (DynoTech Engineering)
I am very interested. Can we see some pictures. I am interested in the under hood appearance, the placement of switches and bottle mount location.
For the coupes does the bottle mount in the storage compartment?
For the coupes does the bottle mount in the storage compartment?
Le Mans Master
Joined: Sep 2000
Posts: 6,976
Likes: 527
From: Clouds Over California
Re: Complete Plug-N-Play C5 Corvette Nitrous System >>>> (Sean03)
Becareful of what you hear and what you know...or what I know...I know of more than one Fbody and C5 that have broken ring lans with 150 shot....not saying it can't be done...its just kind of crystal ball when you start hitting the stock pistons with 150 shot. I have seen a lot of people use a 50 and 100 shot with success.
As for the 10's with your setup on F1's with a 150 shot..mayber if you window switch it in 3rd at WOT. But when you start getting to those hp levels it becomes increasingly difficult to launch..not saying it can't be done...just takes a different technique than the stock hp. I remember running 12.9 on my 97 Coupe...with EMT runcraps...the Coupe was stock except for custom exhaust....good luck eitherway....its going to start getting really hot in Sacramento probably 100+ real soon weather...might have to wait until the fall.
As for the 10's with your setup on F1's with a 150 shot..mayber if you window switch it in 3rd at WOT. But when you start getting to those hp levels it becomes increasingly difficult to launch..not saying it can't be done...just takes a different technique than the stock hp. I remember running 12.9 on my 97 Coupe...with EMT runcraps...the Coupe was stock except for custom exhaust....good luck eitherway....its going to start getting really hot in Sacramento probably 100+ real soon weather...might have to wait until the fall.
Thread Starter
Collections Hold
Joined: Aug 2002
Posts: 2,899
Likes: 6
From: Fort Wayne Indiana
Re: Complete Plug-N-Play C5 Corvette Nitrous System >>>> (Shinobi'sZ)
We are putting the package together now with cost figures and installation photos. We'll post back here later in the week when everything is complete. Thanks for the interest.
Regards,
DTE
Regards,
DTE
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Safety Car
Joined: Mar 2001
Posts: 4,174
Likes: 2
From: Parker Colorado
Re: Complete Plug-N-Play C5 Corvette Nitrous System >>>> (DynoTech Engineering)
We are putting the package together now with cost figures and installation photos. We'll post back here later in the week when everything is complete. Thanks for the interest.
Regards,
DTE
Regards,
DTE
Thread Starter
Collections Hold
Joined: Aug 2002
Posts: 2,899
Likes: 6
From: Fort Wayne Indiana
Re: Complete Plug-N-Play C5 Corvette Nitrous System >>>> (Old Rotor Head)
Hello Gents-
Apologies for the delay.... We've really been busy lately and I have not had a spare minute to set down to answer this thread.
I've taken quite a number of installation photos for you all to see, so that you can get a better idea of what the finished install would look like.
I've forwarded those photos to our webmaster for him to post on our website and he should have them uploaded shortly after the holiday.
We are workiing to further improve our relationship with NX to receive better wholesale pricing so that we can offer this package to you at a much lower cost. I'll keep the board posted. Thanks again for the interest! :) :seeya:
Regards,
Phil
Apologies for the delay.... We've really been busy lately and I have not had a spare minute to set down to answer this thread.
I've taken quite a number of installation photos for you all to see, so that you can get a better idea of what the finished install would look like.
I've forwarded those photos to our webmaster for him to post on our website and he should have them uploaded shortly after the holiday.
We are workiing to further improve our relationship with NX to receive better wholesale pricing so that we can offer this package to you at a much lower cost. I'll keep the board posted. Thanks again for the interest! :) :seeya:
Regards,
Phil
Melting Slicks
Joined: Mar 2001
Posts: 3,261
Likes: 64
From: League City TX
Re: Complete Plug-N-Play C5 Corvette Nitrous System >>>> (DynoTech Engineering)
Very cool. When I was piecing together a kit, keeping the complex wiring neat and professional seemed to be quite a chore.
