Turbo system weight
Thread Starter
Drifting
Joined: Apr 2003
Posts: 1,764
Likes: 31
From: Fort Collins CO
Turbo system weight
Hey all -
doing a bit of reading on the weight of the power adders. Looks like the Maggie is about 50lbs or so, net, and the Centrifugals are closer to 80 or so.
Anybody know how much the complete turbo systems weigh? I recall the turbos on my DSM being fairly heavy, and there are also the intercoolers, manifolds, and all the extra piping to consider.
Anybody have a shipping weight for the TTi system? That'd be close, I imagine.
-Jake
doing a bit of reading on the weight of the power adders. Looks like the Maggie is about 50lbs or so, net, and the Centrifugals are closer to 80 or so.
Anybody know how much the complete turbo systems weigh? I recall the turbos on my DSM being fairly heavy, and there are also the intercoolers, manifolds, and all the extra piping to consider.
Anybody have a shipping weight for the TTi system? That'd be close, I imagine.
-Jake
Drifting
Joined: Jun 2003
Posts: 1,748
Likes: 0
From: CA
Re: Turbo system weight (z-u-later)
I dont know about TTi but my upgraded cerra single box when delivered weighed in around 150lbs including a huge single IC, etc. Of course you can subtract some weight removed on installation (stock manifolds, most of stock h pipe, etc). All in all id say around 125 would be a rough estimate.
Thread Starter
Drifting
Joined: Apr 2003
Posts: 1,764
Likes: 31
From: Fort Collins CO
Re: Turbo system weight (cfi_luz)
For the archives: I sent a quick IM to Bill Reid, and he esimated around 80lbs or so for the complete setup, at least based on the shipping weights he's seen :)
-Jake :cheers:
I love this forum.
-Jake :cheers:
I love this forum.
