Upgrades to Drivetrane
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,727
Likes: 20
From: Carson City, NV
Originally Posted by lutey
Hey Guys, it's been suggested that I do some upgrades to my drivetrane to protect the rear end.
Can you let me know how much I should expect to pay to get these items installed, and if you know a good installer in Las Vegas, or Southern California, let me know that as well.
Here's the parts that have been suggested:
Upgraded Clutch
DTE Differential Strut Brace
Heavy Duty Output Shaft (Lingenfelter)
Thanks for your help!! Darrell
Can you let me know how much I should expect to pay to get these items installed, and if you know a good installer in Las Vegas, or Southern California, let me know that as well.
Here's the parts that have been suggested:
Upgraded Clutch
DTE Differential Strut Brace
Heavy Duty Output Shaft (Lingenfelter)
Thanks for your help!! Darrell
- Exedy Twin Stage II clutch....$1,725
- Z06 slave cylinder w/new throwout bearing and pilot...$125
- McLeod adjustable master cylinder....$335
- Elite Engineering Tunnel Brace....$130
- LGM LT headers with cats.....$1,745
- DTE built 4.10 diff with hardened output shaft...$1,349 (GP)
- DTE strut brace....$397
- Z06 stabilizer bars...$232 (front & rear)
I hope this helps. All prices include shipping and/or tax. Good luck!
John
Le Mans Master
Joined: Jan 2001
Posts: 8,238
Likes: 0
From: Lakeland, Center of Florida Fl
Originally Posted by Cscokd
Hi Darrell....I'm just now going thru this exact same process myself. I just trying to decide when to tackle it. Keeping in mind that I have a '98 MN6 and plan to do many things while I have the IRS completely torn out of the car....here's what I have planned:
- Exedy Twin Stage II clutch....$1,725
- Z06 slave cylinder w/new throwout bearing and pilot...$125
- McLeod adjustable master cylinder....$335
- Elite Engineering Tunnel Brace....$130
- LGM LT headers with cats.....$1,745
- DTE built 4.10 diff with hardened output shaft...$1,349 (GP)
- DTE strut brace....$397
- Z06 stabilizer bars...$232 (front & rear)
I hope this helps. All prices include shipping and/or tax. Good luck!
John
- Exedy Twin Stage II clutch....$1,725
- Z06 slave cylinder w/new throwout bearing and pilot...$125
- McLeod adjustable master cylinder....$335
- Elite Engineering Tunnel Brace....$130
- LGM LT headers with cats.....$1,745
- DTE built 4.10 diff with hardened output shaft...$1,349 (GP)
- DTE strut brace....$397
- Z06 stabilizer bars...$232 (front & rear)
I hope this helps. All prices include shipping and/or tax. Good luck!
John
Lpine@mia.bellsouth.net
Pro
Joined: Nov 2004
Posts: 509
Likes: 0
From: Nevada
Originally Posted by lutey
Hey Guys, it's been suggested that I do some upgrades to my drivetrane to protect the rear end.
Can you let me know how much I should expect to pay to get these items installed, and if you know a good installer in Las Vegas, or Southern California, let me know that as well.
Here's the parts that have been suggested:
Upgraded Clutch
DTE Differential Strut Brace
Heavy Duty Output Shaft (Lingenfelter)
Thanks for your help!! Darrell
Can you let me know how much I should expect to pay to get these items installed, and if you know a good installer in Las Vegas, or Southern California, let me know that as well.
Here's the parts that have been suggested:
Upgraded Clutch
DTE Differential Strut Brace
Heavy Duty Output Shaft (Lingenfelter)
Thanks for your help!! Darrell
Le Mans Master
Joined: Nov 2000
Posts: 7,391
Likes: 3
From: Chandler AZ
Originally Posted by Loboost
I would call Bill Reid at Extreme he is a sponsor on this site and does excellent work and might even work you a deal and pickup and deliver your car back to you.
