Jacking pucks
Melting Slicks
Joined: Aug 2003
Posts: 2,966
Likes: 5
From: Wichita Falls Tx
I'm pretty dumb when it comes to these jacking pucks.
Do they mount and stay on the car all the time or do you only install them each time you jack the car? I assume they stay on the car since there are 4 of them. How do they mount? If they stay on the car, can they come off while driving?
Thanks
Do they mount and stay on the car all the time or do you only install them each time you jack the car? I assume they stay on the car since there are 4 of them. How do they mount? If they stay on the car, can they come off while driving?
Thanks
Race Director
Joined: Sep 2003
Posts: 13,550
Likes: 6
From: Now in God's Country, the Big Sky, Montana!
Cruise-In 7-8-9-10 Veteran
St. Jude Donor '06-'07-'08-'09-'10-'11-'12
I would not suggest leaving them in, besides, it takes about 1.5 seconds to put one in.
Drifting
Joined: Oct 2004
Posts: 1,413
Likes: 0
From: Greensboro, NC "REALITY IS MERELY AN ILLUSION, ALBEIT A VERY PERSISTENT ONE"...ALBERT EINSTEIN"
St. Jude Donor '05-'06-'07
Originally Posted by SpeedyZ
[Their pucks look so good they should sell them in packs of 5 so you can use one on your desk as a paper weight! 
!
!
.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Instructor
Joined: Jun 2004
Posts: 244
Likes: 0
From: Temecula Ca
Originally Posted by ALX99
Does anyone have the BMW part number for the pucks????
thanks
thanks
BMW parts dept part#51-71-1-960-752
Forget the BMW parts, went to the dealer two weeks ago because I thought they were inexpensive, but something like $17.95 each plus sales tax. Also they are plastic which might be OK.
I ordered elites which are about $10 each.
Burning Brakes
Joined: Jan 2002
Posts: 961
Likes: 0
From: Drive for Five N.J.
Originally Posted by Elpelon
BMW parts dept part#51-71-1-960-752
Forget the BMW parts, went to the dealer two weeks ago because I thought they were inexpensive, but something like $17.95 each plus sales tax. Also they are plastic which might be OK.
I ordered elites which are about $10 each.
Forget the BMW parts, went to the dealer two weeks ago because I thought they were inexpensive, but something like $17.95 each plus sales tax. Also they are plastic which might be OK.
I ordered elites which are about $10 each.
Melting Slicks
Joined: Oct 2001
Posts: 2,009
Likes: 8
From: orange county n.y.
Check with your local BMW dealer. I got a set for less that $20.00 about a year ago. That was for 4. Either I got a real bargain or someone misquoted the price to you, or BMW got wise to Corvette owners.
Thread Starter
Instructor
Joined: Jun 2004
Posts: 244
Likes: 0
From: Temecula Ca
Originally Posted by plmkrzy
Check with your local BMW dealer. I got a set for less that $20.00 about a year ago. That was for 4. Either I got a real bargain or someone misquoted the price to you, or BMW got wise to Corvette owners.
Unless the parts person made a mistake he quoted about $17 each. He actually ask me what car it was for, said he had some else a few weeks before with a corvette so knew what I wanted.
I think they come standard with the BMW jack so not many BMW owners are looking for them. I did find them online earlier listed at $6 each but the online picture looked like it might not twist and lock in place.
Burning Brakes
Joined: Sep 2004
Posts: 1,160
Likes: 0
From: Mesquite Texas
Originally Posted by habib
I saw this on the site and looks like a nice feature to have. Seems easy enough to do. Anyone try it yet?? thanks, habib
Jeff is a great guy to deal with also.
Advanced
Joined: Mar 2005
Posts: 73
Likes: 0
From: Sugar Land Texas
Surfing around corvetteforum community, found out about the pucks, just ordered a pack of 4 just now. Within a couple minutes, got a response from Jeff. Very good service. Can't wait to see the items..
Melting Slicks
Joined: Oct 2001
Posts: 2,009
Likes: 8
From: orange county n.y.
Originally Posted by Elpelon
Unless the parts person made a mistake he quoted about $17 each. He actually ask me what car it was for, said he had some else a few weeks before with a corvette so knew what I wanted.
I think they come standard with the BMW jack so not many BMW owners are looking for them. I did find them online earlier listed at $6 each but the online picture looked like it might not twist and lock in place.
I think they come standard with the BMW jack so not many BMW owners are looking for them. I did find them online earlier listed at $6 each but the online picture looked like it might not twist and lock in place.
Drifting
Joined: Oct 2004
Posts: 1,597
Likes: 1
From: Columbus, OH
Originally Posted by plmkrzy
The BMW pucks do not twist in, they snap in. They are fine but I have to admit that even though I have them I just got a set of the Elite pucks and they are much better. Real good quality. Fast shipping. Good price for what you get.
Burning Brakes
Joined: Oct 2004
Posts: 1,213
Likes: 0
From: Bada bing bada bling FL
These pucks sure do look nice but I just have a typical set of jack stands that have a U shaped contact patch. What keeps these pucks from sliding off my stands? I think the Hockey Pucks will grip better.
