Help with Code P0410C
Thread Starter
Racer
Joined: Feb 2005
Posts: 267
Likes: 0
From: Banner Elk NC
St. Jude Donor '05
Help with Code P0410C
Need to know which check valve (drivers side or one behind manifold) would be bad if I am recieveing a Code : 10-PCM P1416C, I know this is Air System Bank 2-B. Just replaced both check valves. The previous code P1416 has only come up twice. I am now getting the infamous P0410C code quite often, could this be a sign the Air pump is going bad or already gone? Is it possible the lines are clogged with carbon? The check valves were quite full of carbon. I have just put 2 cans of Top End cleaner through the system so the carbon build-up is history. The oil was changed the next day. After taking the Maniflod off to replace the Rear check valve everything looked pretty clean. Any help will be appreciated 
Dave
Sorry I should of put this in the Tech Forum
DaveSorry I should of put this in the Tech Forum
Last edited by flash134; Mar 24, 2005 at 03:34 PM. Reason: Wrong Forum
Pro
Joined: Nov 2004
Posts: 528
Likes: 0
From: Thousand Oaks CA
Originally Posted by flash134
Need to know which check valve (drivers side or one behind manifold) would be bad if I am recieveing a Code : 10-PCM P1416C, I know this is Air System Bank 2-B. Just replaced both check valves. The previous code P1416 has only come up twice. I am now getting the infamous P0410C code quite often, could this be a sign the Air pump is going bad or already gone? Is it possible the lines are clogged with carbon? The check valves were quite full of carbon. I have just put 2 cans of Top End cleaner through the system so the carbon build-up is history. The oil was changed the next day. After taking the Maniflod off to replace the Rear check valve everything looked pretty clean. Any help will be appreciated Dave
Sorry I should of put this in the Tech Forum
DaveSorry I should of put this in the Tech Forum
