Looking for Flat-end Jack Stands
Thread Starter
Team Owner
Joined: Jun 2001
Posts: 55,394
Likes: 1
Looking for Flat-end Jack Stands
Harbor freight sells a RED Aluminim jack with some real nice non-traditional stands. The bottom of the stands is round. The adjustable top is much more flat than the widely open end conventional stands and I like this. Problem is Harbor freight doesnt sell thesee nice stands alone - you have to buy the jack and I already have that jack. So I was wondering if anyone has seen stands like this or other similar-looking stands.
TIA
TIA
Last edited by GR8-LIFE; May 4, 2005 at 11:53 AM.
Pro
Joined: Jul 2004
Posts: 710
Likes: 1
From: Fremont (Livin' On The Fault Line!) CA
Check out these, made by a company called AC Hydraulic (I've been on the fence for a set of these along with one of their floor jacks for a while now!):
AC Hydraulic jackstands (scroll down halfway or so to see the 3000NFP model; these have flat posts)
AC Hydraulic jackstands (scroll down halfway or so to see the 3000NFP model; these have flat posts)
Team Owner
Joined: Oct 2001
Posts: 46,766
Likes: 5
From: Boynton Beach Florida
St. Jude Donor '07-'12, '20
Got me the A/C Hydraulics DK13HLQ Jack and 4 of the 3000N Flat Top jack stands 6600 pound capacity each. 
Been using the A/C Hydraulics products for a few years now here at the house. Price is higher than store bought product however, the quality is second to none. 
Mark you know I would not recommend a product unless it's top quality and this is that and more. You can get the stuff from Steve at http://www.ultimategarage.com/
He's a good guy, check out the stuff he works on
Bob
Been using the A/C Hydraulics products for a few years now here at the house. Price is higher than store bought product however, the quality is second to none. Mark you know I would not recommend a product unless it's top quality and this is that and more. You can get the stuff from Steve at http://www.ultimategarage.com/He's a good guy, check out the stuff he works on
Bob
Thread Starter
Team Owner
Joined: Jun 2001
Posts: 55,394
Likes: 1
Originally Posted by 16Again
Got me the A/C Hydraulics DK13HLQ Jack and 4 of the 3000N Flat Top jack stands 6600 pound capacity each. Been using the A/C Hydraulics products for a few years now here at the house. Price is higher than store bought product however, the quality is second to none. Mark you know I would not recommend a product unless it's top quality and this is that and more. You can get the stuff from Steve at http://www.ultimategarage.com/
He's a good guy, check out the stuff he works on
Bob
Been using the A/C Hydraulics products for a few years now here at the house. Price is higher than store bought product however, the quality is second to none. Mark you know I would not recommend a product unless it's top quality and this is that and more. You can get the stuff from Steve at http://www.ultimategarage.com/He's a good guy, check out the stuff he works on
Bob
Amazingly I actually found the exact stands that I saw at Harbor freight elsewhere. They definitely dont look like A/C Hydrolics quality like yours in the pic. But they are TORIN and typically TORIN doesnt make junk. These Jack stands (6000 lb capacity) are more flat than the conventional stands which is what attracted me. Oh yes, well, to be honest, the RED Aluminum and polished look, which matches my Harbor freight jack racing jack also attracted me
Last edited by GR8-LIFE; May 4, 2005 at 04:07 PM.
Thread Starter
Team Owner
Joined: Jun 2001
Posts: 55,394
Likes: 1
Originally Posted by Avanti
Maybe you'll find someone here who wants the jack and not the stands.
All the best.
All the best.
