?
What beautiful pieces!
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
Mike, make sure you check those for clearance by turning the motor over by hand before you close it up. i had to clearance my #7 exhaust rocker because it was too close to the inside edge of the head for comfort.
http://redshift.homestead.com/rockers.html
http://redshift.homestead.com/rockers.html
Thread Starter
Former Vendor
Joined: Feb 2002
Posts: 7,812
Likes: 3
From: DFW, TX www.vettestripes.com
St. Jude Donor '03-'04-'05-'06-'07-'08
Thanks Ed!
I did check and they seem OK. I did turn the motor over couple times and did not hear any weird noise.
They guy told me this is the newly design.
What happen if they really touch?
-Mike
I did check and they seem OK. I did turn the motor over couple times and did not hear any weird noise.
They guy told me this is the newly design.
What happen if they really touch?
-Mike
Administrator
Joined: Mar 2001
Posts: 368,415
Likes: 24,798
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Nice rocker arms.
Thread Starter
Former Vendor
Joined: Feb 2002
Posts: 7,812
Likes: 3
From: DFW, TX www.vettestripes.com
St. Jude Donor '03-'04-'05-'06-'07-'08
Originally Posted by EatRice
Makes you wish you had plexi valve covers. Same thing happened to me when I purchased the Excedy clutch. I did not know if I should install it in the car or hang it on the wall.
I told the samething to my Vette buddies the other day that I wish people can make clear valve cover.
-Mike
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
Originally Posted by mike76002
Thanks Ed!
I did check and they seem OK. I did turn the motor over couple times and did not hear any weird noise.
They guy told me this is the newly design.
What happen if they really touch?
-Mike
I did check and they seem OK. I did turn the motor over couple times and did not hear any weird noise.
They guy told me this is the newly design.
What happen if they really touch?
-Mike
As I said, sounds like your's are fine. Nice job.
Safety Car
Joined: Jul 2002
Posts: 3,874
Likes: 0
From: Fishing Somewhere Cold
St. Jude Donor '11-'12-'13, '15
Originally Posted by EatRice
Makes you wish you had plexi valve covers. Same thing happened to me when I purchased the Excedy clutch. I did not know if I should install it in the car or hang it on the wall.
