No stopping now! 
First "mods" ever
Thread Starter
Drifting
Joined: May 2004
Posts: 1,941
Likes: 1
From: Central CA
First "mods" ever
Well, not exactly Mods, but some cool stuff...
1.) a set of all rubber floor mats... I hate worrying about stepping in water or other crap and then transfering that to my carpets..
http://www.pfyc.com/store/merchant.m...ory_Code=VTINT
2.) CAGS defeat... I hope I bought the right thing... from same store, figured I'd save the cost of shipping prices twice
http://www.pfyc.com/store/merchant.m...ct_Code=VT6001
3.) Simple hood seal, from same vendor... don't know if it helps with power, but I plan on getting open air filter soon, and want to keep it dry and clean... figured this would help, if not, only 12 bux...
http://www.pfyc.com/store/merchant.m...ct_Code=VT3008
Total cost with shipping $97 bones.... I hate CAGS, some I guess may like it, but I don't want GM telling me when I should shift... hood seal.. I have heard things both ways.. its still functional, it seals the hood a bit... if nothing else, keeps the goop out
Its the first of many things to come..... those are the little things I wanted to get, besides tinted windows... the big ones will have to wait until the holiday check arrives!!
thoughts, comments, did I buy the right CAGS defeat?
1.) a set of all rubber floor mats... I hate worrying about stepping in water or other crap and then transfering that to my carpets..
http://www.pfyc.com/store/merchant.m...ory_Code=VTINT
2.) CAGS defeat... I hope I bought the right thing... from same store, figured I'd save the cost of shipping prices twice
http://www.pfyc.com/store/merchant.m...ct_Code=VT6001
3.) Simple hood seal, from same vendor... don't know if it helps with power, but I plan on getting open air filter soon, and want to keep it dry and clean... figured this would help, if not, only 12 bux...
http://www.pfyc.com/store/merchant.m...ct_Code=VT3008
Total cost with shipping $97 bones.... I hate CAGS, some I guess may like it, but I don't want GM telling me when I should shift... hood seal.. I have heard things both ways.. its still functional, it seals the hood a bit... if nothing else, keeps the goop out
Its the first of many things to come..... those are the little things I wanted to get, besides tinted windows... the big ones will have to wait until the holiday check arrives!!
thoughts, comments, did I buy the right CAGS defeat?
Team Owner
Joined: Jul 2004
Posts: 24,652
Likes: 298
From: NJ
St. Jude Donor '05-'08
Congrats.
This is only the beginning.
As far as the CAGS - as long as it is for the right year then you will be ok. FYI - CAGS defeat will be used on the driver's side. Very easy to install...
This is only the beginning.
As far as the CAGS - as long as it is for the right year then you will be ok. FYI - CAGS defeat will be used on the driver's side. Very easy to install...
Burning Brakes
Joined: Feb 2005
Posts: 876
Likes: 1
From: Bar Mills Maine
I'm going through the same dress-up phase as yourself, I just ordered countour-fitting floormats from West Coast Corvettes... not much dirt can get trapped on around them & they keep the floor like it was new... they run a few bucks, but I'd consider them if I were you. Good luck & keep us posted. 
Thread Starter
Drifting
Joined: May 2004
Posts: 1,941
Likes: 1
From: Central CA
Originally Posted by artfahie
I'm going through the same dress-up phase as yourself, I just ordered countour-fitting floormats from West Coast Corvettes... not much dirt can get trapped on around them & they keep the floor like it was new... they run a few bucks, but I'd consider them if I were you. Good luck & keep us posted.
http://www.westcoastcorvette.com/sho...il.cfm?id=1665
They are definately cool, but I want rubber... especially on the passenger side, nobody ever seems to avoid oil and water and gum and mud when they get into the passenger side, so with rubber, I don't have to worry abou tthem avoiding that stuff.. .peace of mind... the ones from PFYC seem to fit pretty well, at least in that picture....
I will get some pics of them when they arrive... I will keep them regardless, 50 bones is my motivation...
how do I install the CAGS defeat? Im sure a write up has been done... is there a link to that write up that someone knows about? Thanks
Team Owner
Joined: Sep 2002
Posts: 30,594
Likes: 4,619
From: Bonita Springs, Florida
Originally Posted by sandmanusd
how do I install the CAGS defeat? Im sure a write up has been done... is there a link to that write up that someone knows about? Thanks
http://97vette.com/howto/cags/index.html
Congrats on the mods and the EB Z06
Thread Starter
Drifting
Joined: May 2004
Posts: 1,941
Likes: 1
From: Central CA
Originally Posted by Mike98SilVert
Thanks and thanks...
I love this forum!
you guys are swell!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Mar 2004
Posts: 1,105
Likes: 0
From: Richmond Virginia
Glad you're in the brother/sisterhood (need that political correctness). Mods are like a snowball rolling downhill ... it picks up dollars as you pick up speed and bling! Only difference is there is no bottom to the hill!
Administrator
Joined: Mar 2001
Posts: 368,360
Likes: 24,783
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
You are being drawn into the world of modding. Can get expensive, but the results are well worth it. 
Thread Starter
Drifting
Joined: May 2004
Posts: 1,941
Likes: 1
From: Central CA
Originally Posted by Mike94ZLT1
Where did you buy those nice rubber mats? I want some!
Melting Slicks
Joined: Feb 2005
Posts: 2,210
Likes: 0
dude, you have no idea because you havent driven it since you installed the Performance Hood Seal -- but ...
well lets just say that you should stap yourself in nice and tight
that performance gain is quoted anywhere from 15HP+ right up to 60HP+ depending on the installation
Congrats!
well lets just say that you should stap yourself in nice and tight
that performance gain is quoted anywhere from 15HP+ right up to 60HP+ depending on the installation
Congrats!
