Finished the "Vette Nest"
Thread Starter
Advanced
Joined: Jan 2005
Posts: 83
Likes: 0
From: Garland Texas
Finished the "Vette Nest"
Kay thinks I have too much time on my hands! Finished the "Vette Nest" in 2 weeks (including the Moto Floor installation). Thanks to Christopher for "coaching me on the attachment process".
What's your opinion? Do I need to add anything?
http://home.comcast.net/~christopher.yon/jcar001.jpg
http://home.comcast.net/~christopher.yon/jcar002.jpg
http://home.comcast.net/~christopher.yon/jcar003.jpg
http://home.comcast.net/~christopher.yon/jcar004.jpg
What's your opinion? Do I need to add anything?
http://home.comcast.net/~christopher.yon/jcar001.jpg
http://home.comcast.net/~christopher.yon/jcar002.jpg
http://home.comcast.net/~christopher.yon/jcar003.jpg
http://home.comcast.net/~christopher.yon/jcar004.jpg
Race Director
Joined: Sep 2003
Posts: 13,550
Likes: 6
From: Now in God's Country, the Big Sky, Montana!
Cruise-In 7-8-9-10 Veteran
St. Jude Donor '06-'07-'08-'09-'10-'11-'12
Excellent! Is that flooring cheaper in price than the Race Deck? Do they offer other colors? 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Advanced
Joined: Jan 2005
Posts: 83
Likes: 0
From: Garland Texas
Notice the reflection of the floor on the vette?
Took it on a road trip to Lake Texahoma last week and have not had time
to clean her up....NXT was applied back in November. Stuff works great!
to clean her up....NXT was applied back in November. Stuff works great!
Last edited by RocDoc04; Jun 21, 2005 at 01:55 PM.
Safety Car
Joined: Jun 2005
Posts: 3,775
Likes: 0
From: St Marys GA
Looking good! Where did you put all your "stuff?"
Not clear from the photos, but do you have door protection on the passenger side wall? No matter how you plan, at some time you will want to open the door while parked.
You may consider rubber dock edging available from Overton's e.g. http://www.overtons.com/modperl/over...item_num=35876 or any marine dealer to tack onto the wall where the door opens.
DBD
'02 Triple black
Not clear from the photos, but do you have door protection on the passenger side wall? No matter how you plan, at some time you will want to open the door while parked.
You may consider rubber dock edging available from Overton's e.g. http://www.overtons.com/modperl/over...item_num=35876 or any marine dealer to tack onto the wall where the door opens.
DBD
'02 Triple black
