[Z06] CCW Drag ???
Thread Starter
Melting Slicks
Joined: Sep 2003
Posts: 2,911
Likes: 1
From: Augusta GA
St. Jude Donor '05-'06
CCW Drag ???
Anyone go from MT ET ST Radials to a CCW slick and skinny? Change in et and 60' plus what size slicks fit with out removing brake ducts? What about brakes fitting? Thanks in advance and have a happy 4th!
Dave
Dave
Le Mans Master
Joined: Jun 2003
Posts: 9,251
Likes: 217
From: 2007 Nat'l Corvette Challenge 11.50 index Champ. New Jersey
Hey Chief, I believe the CCW's come w/ MT ET Streets...Not sure about the size fitment question, but you should save a solid .05+ in 60' & .15 in ET I'd think at a minimum....The skinnies could save you .1 by themselves.
Ron
Ron
Last edited by Dr.Ron; Jul 5, 2005 at 08:26 PM.
Thread Starter
Melting Slicks
Joined: Sep 2003
Posts: 2,911
Likes: 1
From: Augusta GA
St. Jude Donor '05-'06
Dr. Ron,
Thanks for the information. I did get an email back from CCW, but no answers about fit yet. Looks like the way to go. Looks like I will end up swaping fronts and reas before going to the track
Dave
Thanks for the information. I did get an email back from CCW, but no answers about fit yet. Looks like the way to go. Looks like I will end up swaping fronts and reas before going to the track
Dave
