[Z06] quesiton about pulleys
Thread Starter
Pro
Joined: Aug 2005
Posts: 571
Likes: 1
From: Virginia Beach VA...originally Burtonsville, MD
quesiton about pulleys
im goin down to nc next weekend to put on my vararam, thermostat, b&m shifter, and asp under drive pulleys with my buddy. he says that i may need to replace my crank bol after we put on the underdrive pulleys. anybody out there have any thoughts? thanks.
Jim
Jim
Guest
Posts: n/a
You might as well pin the crank while you are in there if you ever go FI and you will deffinetly want to do a new bolt with max strength locktite. Then get the biggest badest impact gun you can find and hit it hard. for added measure, i used a breaker b ar and went alittle more just to be safe.
Be smart and pin the crank so you don't have to pull the rack again.
Brian
Be smart and pin the crank so you don't have to pull the rack again.
Brian
Former Vendor
Joined: Apr 1999
Posts: 7,607
Likes: 1
From: ECS Sales & Service Advisor
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by bvillezo6
im goin down to nc next weekend to put on my vararam, thermostat, b&m shifter, and asp under drive pulleys with my buddy. he says that i may need to replace my crank bol after we put on the underdrive pulleys. anybody out there have any thoughts? thanks.
Jim
Jim
Good luck!
