[Z06] LS7 Clutches Available!
Thread Starter
Safety Car
Joined: Oct 2003
Posts: 3,643
Likes: 0
From: Limerick Pa
LS7 Clutches Available!
Hi All,
The LS7 clutch is available. It has been confirmed to fit in any LS1/LS6/LS2 Corvette combo. This comes without the flywheel which is an added bonus for those of you who purchase a different type flywheel or for those of you who don't need one. It is 317.99 shipped!
Gene
The LS7 clutch is available. It has been confirmed to fit in any LS1/LS6/LS2 Corvette combo. This comes without the flywheel which is an added bonus for those of you who purchase a different type flywheel or for those of you who don't need one. It is 317.99 shipped!
Gene
Racer
Joined: May 2005
Posts: 403
Likes: 1
From: Fort Lauderdale
This is great, I have heard of people with bone stock Z06's running into the 11's and having the clutch slipping..
I also plan to add a few bolt ons if I get a C5 Z06 and maybe a small shot so this clutch should be great for it...
I also plan to add a few bolt ons if I get a C5 Z06 and maybe a small shot so this clutch should be great for it...
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Intermediate
Joined: Nov 2004
Posts: 27
Likes: 0
Originally Posted by sskeet
This is great, I have heard of people with bone stock Z06's running into the 11's and having the clutch slipping..
I also plan to add a few bolt ons if I get a C5 Z06 and maybe a small shot so this clutch should be great for it...
I also plan to add a few bolt ons if I get a C5 Z06 and maybe a small shot so this clutch should be great for it...
Instructor
Joined: Feb 2000
Posts: 159
Likes: 0
From: Henderson NV
Clutch
It was my understanding that the LS7 clutch needed the ls2 flywheel and the LS7 pressure plate - have been following this at ls1tech.com (http://www.ls1tech.com/forums/showth...8&page=6&pp=20). Anyhow, would appreciate a definitive word. How much to install the clutch?