When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just looked up Frost King. Their junk weighs in at .35 lbs per sq ft. My stuff is .61. Do the math and I think you will see the difference.
I am about to do my C5, and had decided on a product called Damplifier PRO. Looks to be thicker than your stuff (.90 vs your .60). Same idea, non-tar with aluminum surface. Any idea on a comparison? Check out secondskinaudio.com. Their price is a little lower (about $3.50 per sq foot) than the price you mention although not pre-cut (Is you kit sheets, or pre-cut pieces?). Comments?
I just looked up the weight and it is .49 lbs/ft2, so I guess your stuff would be a better performer and slimmer also.
Last edited by Beezvette; Nov 24, 2005 at 06:18 PM.
By the way, Reflectix works GREAT around the heating ducts. I installed it about 15 years ago and my fuel oil delivery guy says that of all his 350 customers, I use less oil than anyone.
