New Headers
Thread Starter
Burning Brakes
Joined: Nov 2005
Posts: 1,005
Likes: 0
From: Mustangs are like Tampons.. Every P*$$* has one!
New Headers
Which headers will hook striaght up to the stock H-Pipe?? I do not want and X-pipe because I love the popping of my B&B Bullets! Will the SLP long tube package work. It can be found at http://www.tbyrnemotorsports.com/c5catalog.html
near the bottom.
Thanks
Doug
near the bottom.
Thanks
Doug
Racer
Joined: Mar 2005
Posts: 475
Likes: 0
From: Euless TX
In the 3rd paragraph under the slp list it states you will need the slp h-down pipe and header installation kit (not included). The only ones the will work with the stock h pipe is the B&B, Borla, JBA, and BBK.
Supporting Tuner
Joined: Sep 2004
Posts: 51,896
Likes: 39
From: ================== Houston, Texas www.englandgreen.com ================== Necessary Evil™ __________
CI 6-7-8-9-10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14
Keeping the stock H-pipe completely negates the point of long tube headers. With long tubes, high flow cats and x-pipe, you will still get the popping on decel.
http://forums.corvetteforum.com/show..._id=103&arch=1
http://forums.corvetteforum.com/show..._id=103&arch=1
Le Mans Master
Joined: Dec 2001
Posts: 7,788
Likes: 6
From: Winchester TN
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
St. Jude Donor '03-'04-'05-'06-'07-'11
Hi vertc51116 -
I have talked to LGM about their long tubes. bobby at LGMotorsports told me that there would be some popping on decelleration with the headers and x-pipe.
I kinda like that personality trait of my Z06 too....
best regards -
mqqn
I have talked to LGM about their long tubes. bobby at LGMotorsports told me that there would be some popping on decelleration with the headers and x-pipe.
I kinda like that personality trait of my Z06 too....
best regards -
mqqn
Thread Starter
Burning Brakes
Joined: Nov 2005
Posts: 1,005
Likes: 0
From: Mustangs are like Tampons.. Every P*$$* has one!
As Always, EG comes and lets me know what going on! Thanks EG. Depending on the price difference The headers and X-Pipe MAY be comign before the HEads and cam. This all is depending on if I get my new job! **fingers crossed**. Right now I am working at fast food $7.75/hr that is ONLY paying for the Vette. Nothing for it (besides Gas) Now I have the opertunity to earn $20/hr cutting glass all day but I was just promoted to manager and I am opening a new store Wednesday. ALL while I am 17 and still in High School. SO, I am going to do some research on the headers you mentioned EG as well as the AOA! Thanks you ONCE AGAIN for your help!
Doug
Doug
Burning Brakes
Joined: Jun 2005
Posts: 807
Likes: 1
From: Miami Lakes FL
i have kooks long tube headers with x-pipe and high flow cats with borla catback and it still has popping on decel.....this setup sounds incredible....i have heard others but nothing compares.....the quality of sound is amazing
Thread Starter
Burning Brakes
Joined: Nov 2005
Posts: 1,005
Likes: 0
From: Mustangs are like Tampons.. Every P*$$* has one!
http://www.corvettegarage.com/produc...-corvette.html
Hmmm. Looks like the entire Dynatech system from corvette garage is going to be $1600. Looks like i am going to have to take the new job and start saving! Unless I have been misled I believe this is less than the heads and cam SO... thats what I am going to do.
Thanks again to everyone and especially EG!
Doug
Hmmm. Looks like the entire Dynatech system from corvette garage is going to be $1600. Looks like i am going to have to take the new job and start saving! Unless I have been misled I believe this is less than the heads and cam SO... thats what I am going to do.
Thanks again to everyone and especially EG!
Doug
Drifting
Joined: Jul 2005
Posts: 1,694
Likes: 4
From: Franklin Square Long Island NY
Originally Posted by vertc51116
Which headers will hook striaght up to the stock H-Pipe?? I do not want and X-pipe because I love the popping of my B&B Bullets! Will the SLP long tube package work. It can be found at http://www.tbyrnemotorsports.com/c5catalog.html
near the bottom.
Thanks
Doug
near the bottom.
Thanks
Doug
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Drifting
Joined: Jul 2005
Posts: 1,694
Likes: 4
From: Franklin Square Long Island NY
Originally Posted by vertc51116
Which headers will hook striaght up to the stock H-Pipe?? I do not want and X-pipe because I love the popping of my B&B Bullets! Will the SLP long tube package work. It can be found at http://www.tbyrnemotorsports.com/c5catalog.html
near the bottom.
Thanks
Doug
near the bottom.
Thanks
Doug
Supporting Tuner
Joined: Sep 2004
Posts: 51,896
Likes: 39
From: ================== Houston, Texas www.englandgreen.com ================== Necessary Evil™ __________
CI 6-7-8-9-10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14
Originally Posted by vertc51116
http://www.corvettegarage.com/produc...-corvette.html
Hmmm. Looks like the entire Dynatech system from corvette garage is going to be $1600. Looks like i am going to have to take the new job and start saving! Unless I have been misled I believe this is less than the heads and cam SO... thats what I am going to do.
Thanks again to everyone and especially EG!
Doug
Hmmm. Looks like the entire Dynatech system from corvette garage is going to be $1600. Looks like i am going to have to take the new job and start saving! Unless I have been misled I believe this is less than the heads and cam SO... thats what I am going to do.
Thanks again to everyone and especially EG!
Doug
Race Director
Joined: Apr 2001
Posts: 19,329
Likes: 16
From: Saint Augustine, FL
Mid-TN Events Coordinator
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Originally Posted by EnglandGreen
Keeping the stock H-pipe completely negates the point of long tube headers. With long tubes, high flow cats and x-pipe, you will still get the popping on decel.
http://forums.corvetteforum.com/show..._id=103&arch=1
http://forums.corvetteforum.com/show..._id=103&arch=1
