[Z06] Zip tie mod?
Le Mans Master
Joined: Dec 2001
Posts: 7,788
Likes: 6
From: Winchester TN
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
St. Jude Donor '03-'04-'05-'06-'07-'11
Hi pirate#3 -
What is it you are looking for?
The Zip tie mod will open up the intake - by removing the airbox cover.
Doing this, however, allows water to run into the airbox through the gap between the leading edge of the hood and the front fascia.
I recommend a hood seal with the zip tie mod.
It is a good way to save some $ for headers, or a tune etc.
I had mine done for a while, then put on a Halltech TRAP just because I liked the looks of that setup.
best regards -
mqqn
What is it you are looking for?
The Zip tie mod will open up the intake - by removing the airbox cover.
Doing this, however, allows water to run into the airbox through the gap between the leading edge of the hood and the front fascia.
I recommend a hood seal with the zip tie mod.
It is a good way to save some $ for headers, or a tune etc.
I had mine done for a while, then put on a Halltech TRAP just because I liked the looks of that setup.
best regards -
mqqn
Pro
Joined: Jan 2005
Posts: 556
Likes: 0
From: Jacksonville FL
St. Jude Donor '06-'09
did a zip-tie about 3 months ago, best 2.00 and 20 minutes ever spent on the car.
INSTANT GRAIFICATION
yes, I already had a hood seal and you shouldnt do it unless you have one too.
INSTANT GRAIFICATION
yes, I already had a hood seal and you shouldnt do it unless you have one too.
Safety Car
Joined: Sep 2005
Posts: 3,610
Likes: 12
From: Philly Burbs PA
I did it a long time ago and the car dyno'd 365rwhp & 358tq, with only this mod, I also drove thru some serious rain in florida last year on power tour and not a single problem, I have since switch but only because I got a great deal on a new intake.
