Seat broke :(
Thread Starter
Instructor
Joined: Feb 2005
Posts: 215
Likes: 0
From: Long Island NY
Seat broke :(
While I was driving today; my seat made a ' pop pop pop' sound and went down.
I am unable to raise my rear of my seat now.
I can hear the motor working when I push the button; but nothing happens. I can move everything else.
Any ideas?
I am unable to raise my rear of my seat now.
I can hear the motor working when I push the button; but nothing happens. I can move everything else.Any ideas?
Thread Starter
Instructor
Joined: Feb 2005
Posts: 215
Likes: 0
From: Long Island NY
I weigh 178 pounds, all i did was sit down..
I went to my Chevy dealer; and they dont sell the part. You have to buy the whole thing
I read somewhere that someone had extra parts on here.. I need to look around
I went to my Chevy dealer; and they dont sell the part. You have to buy the whole thing
I read somewhere that someone had extra parts on here.. I need to look around
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Instructor
Joined: Feb 2005
Posts: 215
Likes: 0
From: Long Island NY
Originally Posted by foremaw
Do you have the part number? If so, please post it, we'll see if we can locate one for you.
Melting Slicks
Joined: Jul 2005
Posts: 3,457
Likes: 0
From: bolckow missouri
i sent my parts to a forum member , maybe he will chime in and help you out as i helped him , he also has used them to help someone alse so i don't know what he has left . i originaly got them from corvette salvage. good luck . the seat track was about 250.00 from them .
Melting Slicks
Joined: Jul 2000
Posts: 2,073
Likes: 0
From: East Lansing, Mi
Originally Posted by oaks99
i sent my parts to a forum member , maybe he will chime in and help you out as i helped him , he also has used them to help someone alse so i don't know what he has left . i originaly got them from corvette salvage. good luck . the seat track was about 250.00 from them .
A friend of mine did use the JB Weld tape on that exact part. It is a pliable tape that you mix and it has held up for more than a year now on his. Otherwise it is the whole assembly. Thanks again! Jim
Thread Starter
Instructor
Joined: Feb 2005
Posts: 215
Likes: 0
From: Long Island NY
Originally Posted by oaks99
i sent my parts to a forum member , maybe he will chime in and help you out as i helped him , he also has used them to help someone alse so i don't know what he has left . i originaly got them from corvette salvage. good luck . the seat track was about 250.00 from them .
Melting Slicks
Joined: Jul 2005
Posts: 3,457
Likes: 0
From: bolckow missouri
Originally Posted by 99SilverVert
No go. My local auto wrecker doesnt have anything and he did a search and nothing>
Can anyone help me out here!
Can anyone help me out here!
http://www.corvettesalvage.com/
try this link or there is phone number to contact i'm sure they can help