Interior vendors
Thread Starter
Instructor
Joined: Oct 2004
Posts: 179
Likes: 1
From: gainesville florida
Interior vendors
Hi,
I saw a post back around Christmas, from a vendor that I can't recall, asking for ideas.
Has anyone seen or suggested a alumin. one piece bezel to go around both the radio and A/C controls? maybe 1/2 or so wide , brushed on the inner, and a polished lip.
Yes, I have installed the gauge bezels and like the look. I'm not interested in a plastic or film that sticks on, but real aluminum, or even stainless steel.
If someone made the radio/AC bezel, then maybe follow it up with a bezel that would go around the shifter, and tuck in between the boot and console. That would present a hassel as there are several twists and surfaces to follow, but it would look nice, I think.
Then finish off the package with alumin. door handles. I think I have seen these on the GTOs , but would love to see these three parts in a kit to compliment my gauge bezels.
Maybe someone makes this, if so, send me a link, if not?.........
Thanks,
Jw
I saw a post back around Christmas, from a vendor that I can't recall, asking for ideas.
Has anyone seen or suggested a alumin. one piece bezel to go around both the radio and A/C controls? maybe 1/2 or so wide , brushed on the inner, and a polished lip.
Yes, I have installed the gauge bezels and like the look. I'm not interested in a plastic or film that sticks on, but real aluminum, or even stainless steel.
If someone made the radio/AC bezel, then maybe follow it up with a bezel that would go around the shifter, and tuck in between the boot and console. That would present a hassel as there are several twists and surfaces to follow, but it would look nice, I think.
Then finish off the package with alumin. door handles. I think I have seen these on the GTOs , but would love to see these three parts in a kit to compliment my gauge bezels.
Maybe someone makes this, if so, send me a link, if not?.........
Thanks,
Jw
Administrator
Joined: Mar 2001
Posts: 368,541
Likes: 24,833
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
I think the vendor was Mid-America Motorworks. Try contacting Vette Essentials - I think at one time they were offering some aluminum interior pieces.
Thread Starter
Instructor
Joined: Oct 2004
Posts: 179
Likes: 1
From: gainesville florida
Thanks,
I went their site but didn't see anything there. I'll call as they might not have it on the site.
Maybe someone else will come up with another site as well.
Thanks again,
Jw
I went their site but didn't see anything there. I'll call as they might not have it on the site.
Maybe someone else will come up with another site as well.
Thanks again,
Jw
