Reprogramming TPMS

Reply Subscribe

Thread Tools

Search this Thread

Dec 1, 2006 | 02:50 PM

vettmanjj

Thread Starter

Advanced

Joined: Feb 2001

Posts: 64

Likes: 0

From: Clifton, VA, USA

Reprogramming TPMS

Would someone please tell me how "strong" a magnet I need to re-program tire pressure sensors. For my purposes, I guess wt./size would work for description of what I need, and a recommended source would be helpful, too. Thanks

Dec 1, 2006 | 02:55 PM

TSIGUY

Heel & Toe

Joined: Feb 2005

Posts: 17

Likes: 0

I can't answer your question, but my local dealer has always done this as a "freebie." Maybe yours will do the same?

Dec 1, 2006 | 08:30 PM

Bill Vett

Safety Car

Joined: Feb 2001

Posts: 3,725

Likes: 53

From: Warrington Pa.

If you have an old speaker or even a kids magnet it will work fine.

Dec 1, 2006 | 08:41 PM

vettmanjj

Thread Starter

Advanced

Joined: Feb 2001

Posts: 64

Likes: 0

From: Clifton, VA, USA

Thanks

I was thinking on a larger scale--a 20 lb.-pull horseshoe type. I won't have any problem finding an old speaker magnet. Where is the best place to position the magnet, e.g., above the valve stem, touching the stem, right, left, etc.

Dec 1, 2006 | 08:48 PM

gpotski

Race Director

Joined: Jul 2004

Posts: 14,606

Likes: 219

From: Ohio

I got one of these "rare earth" ring magnets...it fits over the valve stem, and is very strong...the horn chirps instantly!

Here's the web site...very fast turnaround too.

http://www.amazingmagnets.com/index....ROD&ProdID=116

Two magnets for $11.50 plus shipping. Very handy.

Last edited by gpotski; Dec 1, 2006 at 11:00 PM.

Dec 1, 2006 | 09:14 PM

Bill Vett

Safety Car

Joined: Feb 2001

Posts: 3,725

Likes: 53

From: Warrington Pa.

Just place the magnet next to the valve stem. If you use a heavy duty magnet you may want to put a towel around the magnet so you don't scratch your rim.