Ever Use These Wires?
Thread Starter
Race Director
Joined: Apr 2004
Posts: 16,135
Likes: 5
From: Newberry FL
Cruise-In VIII Veteran
St. Jude Donor '07
Ever Use These Wires?
http://www.ecklers.com/product.asp?p...dept%5Fid=1283
Curious if anyone has ever used these wires? Buddy of mine has them and spoke highly of them, I was considering going with something besides the current MSD 8.5 MM I have on now.
Curious if anyone has ever used these wires? Buddy of mine has them and spoke highly of them, I was considering going with something besides the current MSD 8.5 MM I have on now.
Race Director
Joined: Oct 2002
Posts: 16,477
Likes: 26
From: Gone
CI 6-7-8-9-10 Veteran
St. Jude Donor '03
I put those Taylors in when I did the cam swap.
They could have been 1/2" longer...some of them were a bit of a stretch to get in, but they all clicked into place securely. Only have about 1500 miles on them, but so far.so good.
They could have been 1/2" longer...some of them were a bit of a stretch to get in, but they all clicked into place securely. Only have about 1500 miles on them, but so far.so good.
Thread Starter
Race Director
Joined: Apr 2004
Posts: 16,135
Likes: 5
From: Newberry FL
Cruise-In VIII Veteran
St. Jude Donor '07
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Burning Brakes
Joined: Nov 2004
Posts: 1,226
Likes: 3
From: Lakemoor IL
Here's an interesting read for you.
http://www.ls1tech.com/forums/showth...ignition+wires
Not sure if there's a performance gain from lower resistance, but it can't be bad.
http://www.ls1tech.com/forums/showth...ignition+wires
Not sure if there's a performance gain from lower resistance, but it can't be bad.
Thread Starter
Race Director
Joined: Apr 2004
Posts: 16,135
Likes: 5
From: Newberry FL
Cruise-In VIII Veteran
St. Jude Donor '07
Here's an interesting read for you.
http://www.ls1tech.com/forums/showth...ignition+wires
Not sure if there's a performance gain from lower resistance, but it can't be bad.
http://www.ls1tech.com/forums/showth...ignition+wires
Not sure if there's a performance gain from lower resistance, but it can't be bad.
