ECS Customer Web Page
Thread Starter
Team Owner
Joined: Jul 2004
Posts: 24,652
Likes: 298
From: NJ
St. Jude Donor '05-'08
ECS Customer Web Page
As many people know the current ECS Web page stinks - ok it sucks or should that be blows 
Anyway -
It is in the process of being updating and I mentioned to Chris and Doug this would be a good time to add a current list of ECS Customers cars to the website and show YOU some recognition for supporting ECS through the years.
Chris and Doug were 100% behind the idea so here it is. Post your ECS car and modifications to this thread and we will get it on the ECS website over the next few weeks.
If possible please send pictures to ecsracing@ecsracing.com along with your CF Name so that we can host the pictures on the ECS site.
Thanks
ECS Team
Anyway - It is in the process of being updating and I mentioned to Chris and Doug this would be a good time to add a current list of ECS Customers cars to the website and show YOU some recognition for supporting ECS through the years.
Chris and Doug were 100% behind the idea so here it is. Post your ECS car and modifications to this thread and we will get it on the ECS website over the next few weeks.
If possible please send pictures to ecsracing@ecsracing.com along with your CF Name so that we can host the pictures on the ECS site.
Thanks
ECS Team
Last edited by Wicked Weasel; Feb 5, 2007 at 10:36 AM.
Race Director
Joined: Aug 2004
Posts: 14,639
Likes: 39
From: Winston-Salem North Carolina
St. Jude Donor '08-'09
02 Torch Red Z06. Go fast mods..... 
ECS custom cam, ported oil pump, double roller timing chain, 160* t-stat, ngk plugs, taylor wires, 921 springs/titanium reatainers, underdrive pulley, ECS tuning, ECS installed LS7 clutch, vararam, slp long tube headers/hi flow cats/h-pipe/ 3" exhaust. Michelin Pilot Sport Cups-rear 315/30/18 front 295/30/18 on CCW Classics. 430rwhp383rwtq on stock un-touched heads
Safety mods.....ECS seat conversion(allows for over the shoulder straps), B K Harness bar with carera mount, polymatrix brake pads, 5lb.fire extinguisher
Looking good mods.......Black racing stripes from Mike79002, lower rear facia painted black, black lettering for front plate, rearend, fuel rail covers, custom fender badges from Austin Barnett, exhaust plate, speed bleeders, not sure where this mod falls, oil catch can.
thats all.....so far
ECS custom cam, ported oil pump, double roller timing chain, 160* t-stat, ngk plugs, taylor wires, 921 springs/titanium reatainers, underdrive pulley, ECS tuning, ECS installed LS7 clutch, vararam, slp long tube headers/hi flow cats/h-pipe/ 3" exhaust. Michelin Pilot Sport Cups-rear 315/30/18 front 295/30/18 on CCW Classics. 430rwhp383rwtq on stock un-touched heads Safety mods.....ECS seat conversion(allows for over the shoulder straps), B K Harness bar with carera mount, polymatrix brake pads, 5lb.fire extinguisher
Looking good mods.......Black racing stripes from Mike79002, lower rear facia painted black, black lettering for front plate, rearend, fuel rail covers, custom fender badges from Austin Barnett, exhaust plate, speed bleeders, not sure where this mod falls, oil catch can.
thats all.....so far
Last edited by GeorgeZNJ; Feb 6, 2007 at 08:55 AM.
Race Director
Joined: Dec 2004
Posts: 14,358
Likes: 1
From: Medford NJ
Small bones here compared to most of ya, but here goes:
'97 MN6 w/
American Racing Headers
Corsa Pace Car cat-back
Donaldson Blackwing (from good 'ole George)
(and current electrical gremlin - not from ECS
)
Actually this is not a bad idea for people who want to see or hear a set up they are considering.
'97 MN6 w/
American Racing Headers
Corsa Pace Car cat-back
Donaldson Blackwing (from good 'ole George)
(and current electrical gremlin - not from ECS
)Actually this is not a bad idea for people who want to see or hear a set up they are considering.
Thread Starter
Team Owner
Joined: Jul 2004
Posts: 24,652
Likes: 298
From: NJ
St. Jude Donor '05-'08
Small bones here compared to most of ya, but here goes:
'97 MN6 w/
American Racing Headers
Corsa Pace Car cat-back
Donaldson Blackwing (from good 'ole George)
(and current electrical gremlin - not from ECS )
Actually this is not a bad idea for people who want to see or hear a set up they are considering.
'97 MN6 w/
American Racing Headers
Corsa Pace Car cat-back
Donaldson Blackwing (from good 'ole George)
(and current electrical gremlin - not from ECS
)Actually this is not a bad idea for people who want to see or hear a set up they are considering.
nothing is small bones.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Pro
Joined: Dec 2003
Posts: 706
Likes: 46
From: Vienna VA
ECS Mods include:
ETP heads (59cc chambers.stainless valves with double springs)
Comp Cam (224/230, 588/591, LSA 114)
ASP under drive pulley
Ported oil pump
Ported throttle body
ARP head stud kit
160 degree thermostat
NGK plugs
Taylor wires
Clutch (RPS single disk, twin friction)
New slave cylinder and throw out bearing
DTE Brace
LG Motorsport LT Headers, Hi-Flow Cats, X-Pipe
4.10 Rear w/Hardened right output shaft
Custom dyno tuning (420 rwhp / 357 rwtq)
Best 1/4 mile to date: 11.92 sec. @ 118.29mph
ETP heads (59cc chambers.stainless valves with double springs)
Comp Cam (224/230, 588/591, LSA 114)
ASP under drive pulley
Ported oil pump
Ported throttle body
ARP head stud kit
160 degree thermostat
NGK plugs
Taylor wires
Clutch (RPS single disk, twin friction)
New slave cylinder and throw out bearing
DTE Brace
LG Motorsport LT Headers, Hi-Flow Cats, X-Pipe
4.10 Rear w/Hardened right output shaft
Custom dyno tuning (420 rwhp / 357 rwtq)
Best 1/4 mile to date: 11.92 sec. @ 118.29mph
Race Director
Joined: Apr 2002
Posts: 11,485
Likes: 1
From: Far side of the Moon
CI 4-5-6-7-8 Veteran
St. Jude '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-16-'17
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
Their special driveshaft...........
Can't really post any launch pics till 2-24 but..........should look like this
Can't really post any launch pics till 2-24
but..........should look like this
