C6 Shift Knob Question
Thread Starter
Burning Brakes
Joined: Mar 2003
Posts: 891
Likes: 165
From: Oswego IL
C6 Shift **** Question
After reading several posts on the aftermarket shifters, I decided to go with the B&M, however can someone confirm if the C6 Shift **** will work directly with the B&M 45044? Does someone have a part number for the shift **** by itself?
Thanks,
Ron
Thanks,
Ron
Burning Brakes
Joined: Dec 2006
Posts: 1,092
Likes: 0
From: Deerfield VA
St. Jude Donor '07
I have that shifter, love it! No vibration, accurate, very precise. Now, A stock C-6 **** WILL FIT IT. It has the lock screw for the **** built into it, you just have to reverse the keyway on the shift lever forward. The instructions explain it well. I bought a modified C-6 **** from GS Creations, which screws on, but I found out after buying the shifter, a stock **** would also fit.
John
John
Thread Starter
Burning Brakes
Joined: Mar 2003
Posts: 891
Likes: 165
From: Oswego IL
I have that shifter, love it! No vibration, accurate, very precise. Now, A stock C-6 **** WILL FIT IT. It has the lock screw for the **** built into it, you just have to reverse the keyway on the shift lever forward. The instructions explain it well. I bought a modified C-6 **** from GS Creations, which screws on, but I found out after buying the shifter, a stock **** would also fit.
John
John
