C5 Body Kit
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
Both kits are made by ACP.
The first kit shown is the ACP Z11 and the second is the Wide body kit.
I personally like the first one and so I embarked on my current project. Here's a few pictures for you guys.
My car is in phase I of (3) phase facelift. Only the front is complete as I am converting my coupe to an FRC. Phase II will be the removal of maggie and auto tranny for a stick shift and normally aspirated motor and the removal of the interior for FRC conversion. Phase (3) will be the conversion to FRC and the completion of the rear panels and the car re-shot with NBM paint.
I had a custom rear clip done with integrated spoiler and the bottom flares molded in. The side pieces and rear are started but not complete due to the conversion to an FRC.
I'm picking up the car this Friday and will get some better pictures.
The first kit shown is the ACP Z11 and the second is the Wide body kit.
I personally like the first one and so I embarked on my current project. Here's a few pictures for you guys.
My car is in phase I of (3) phase facelift. Only the front is complete as I am converting my coupe to an FRC. Phase II will be the removal of maggie and auto tranny for a stick shift and normally aspirated motor and the removal of the interior for FRC conversion. Phase (3) will be the conversion to FRC and the completion of the rear panels and the car re-shot with NBM paint.
I had a custom rear clip done with integrated spoiler and the bottom flares molded in. The side pieces and rear are started but not complete due to the conversion to an FRC.
I'm picking up the car this Friday and will get some better pictures.
Team Owner
Joined: May 2006
Posts: 21,473
Likes: 356
From: Palmdale, Ca----- 2009 Cyber Gray 4LT A6 F55 452 RWHP 422 RWTQ- RIP 1998 C5 734 RWHP & 585 RWTQ-----
1st one for me! Although the spoiler is a bit tall for my taste! IMHO
Looks real good on black too!
I think color will help you decide because perhaps the kit on the black Vette might not look good on the Silver one! Hummmm!
Thanks,Matt(Vote still on 1st)
Looks real good on black too!
I think color will help you decide because perhaps the kit on the black Vette might not look good on the Silver one! Hummmm!
Thanks,Matt(Vote still on 1st)
