Spring Picture Day.
Thread Starter
C5 General
Joined: Nov 2005
Posts: 3,391
Likes: 0
From: Boosted in Manhattan & Round Rock TX. President of the Non Club Club of Kansas and Round Rock , Not the flat part.
Yes
I guess the hardest part was geting the hole in the right spot
on the rocker and the wheel well. You only get one try if its to big.
If you need any info. let me know. Ill be glad to help.
Thanks again all
Paul G.
I guess the hardest part was geting the hole in the right spot
on the rocker and the wheel well. You only get one try if its to big.
If you need any info. let me know. Ill be glad to help.
Thanks again all
Paul G.
Thread Starter
C5 General
Joined: Nov 2005
Posts: 3,391
Likes: 0
From: Boosted in Manhattan & Round Rock TX. President of the Non Club Club of Kansas and Round Rock , Not the flat part.
Your outher car next to the Vette has a lot of decals.
I got them on
bay. The letters are C6 stile. I was sent the wrong ones and tryed them out on the fender. I do not think thay will last to long on the fender. Paul G.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Racer
Joined: Mar 2007
Posts: 305
Likes: 0
From: N Seattle WA
brake ducks
Ya, I just bought some chrome C6 wheels, thought I chill for a bit before I start the brake duct, kinda scary to cut in to the car, but think I have an idea how to make a patern for the outside before I cut, the hard part I think is cutting inside the fender wall, marking that right spot...any ideas?
Thread Starter
C5 General
Joined: Nov 2005
Posts: 3,391
Likes: 0
From: Boosted in Manhattan & Round Rock TX. President of the Non Club Club of Kansas and Round Rock , Not the flat part.
The wheelwell came out pretty good.
I only cut a hole for the duct to slid into.
Not the whole white line in the pic.
A few pics.
Paul G.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
I only cut a hole for the duct to slid into.
Not the whole white line in the pic.
A few pics.
Paul G.
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
Last edited by unionlandlord; Apr 3, 2007 at 10:44 PM.
Pro
Joined: Jan 2007
Posts: 515
Likes: 0
From: United Kingdom England
Hi Paul your car looks great. I have a 97 silver coupe also. If I only had the money for the wheels! Your car is done just how I would like mine to end up.
I have even seen those stripes on ebay and thought they look good. I want to do rear brake ducts screens but like most I am a bit apprehensive on cutting holes in the Vette!
I have done side fender screens and most of the interior in blue LEDs.
A few logos and silver painted gauge bezels so far.
Your front ZO6 screens look kinda red! Are they painted red or what!
I have even seen those stripes on ebay and thought they look good. I want to do rear brake ducts screens but like most I am a bit apprehensive on cutting holes in the Vette!
I have done side fender screens and most of the interior in blue LEDs.
A few logos and silver painted gauge bezels so far.
Your front ZO6 screens look kinda red! Are they painted red or what!
Racer
Joined: Mar 2007
Posts: 305
Likes: 0
From: N Seattle WA
brake ducks
damn, I didn't know you gonna have such great pic of the project, this big help, you line that up pretty good, I can't beleive the neither part came with cut out patterns, kinda left you on your own of lining things up, I don't know about yours but mine didn't even have the nuts to bolt the screen part on.
Must be tricky to mark that white line just right......?
Must be tricky to mark that white line just right......?
Thread Starter
C5 General
Joined: Nov 2005
Posts: 3,391
Likes: 0
From: Boosted in Manhattan & Round Rock TX. President of the Non Club Club of Kansas and Round Rock , Not the flat part.
Hi Paul your car looks great. I have a 97 silver coupe also. If I only had the money for the wheels! Your car is done just how I would like mine to end up.
I have even seen those stripes on ebay and thought they look good. I want to do rear brake ducts screens but like most I am a bit apprehensive on cutting holes in the Vette!
I have done side fender screens and most of the interior in blue LEDs.
A few logos and silver painted gauge bezels so far.
Your front ZO6 screens look kinda red! Are they painted red or what!
I have even seen those stripes on ebay and thought they look good. I want to do rear brake ducts screens but like most I am a bit apprehensive on cutting holes in the Vette!
I have done side fender screens and most of the interior in blue LEDs.
A few logos and silver painted gauge bezels so far.
Your front ZO6 screens look kinda red! Are they painted red or what!
I painted the screens burgundy and some outher parts, but I may change it. trying out how a burgundy hood decal will look this week.
I think it will go good w/firethorn int.
Good luck on geting some wheels and any other mod soon.
damn, I didn't know you gonna have such great pic of the project, this big help, you line that up pretty good, I can't beleive the neither part came with cut out patterns, kinda left you on your own of lining things up, I don't know about yours but mine didn't even have the nuts to bolt the screen part on. Must be tricky to mark that white line just right......?
Must be tricky to mark that white line just right......?
One prob is I was given two driver side scoops, so I will be doing the passenger side Wed/Thur or Friday. Ill take some more pics.Glad you like it,
Paul G.
Burning Brakes
Joined: Dec 2006
Posts: 872
Likes: 3
From: 90% of all Fords are still on the road.....the other 10% actually made it home!
Looks Goooooood Paul!!
NOW SHINE THOSE TIRES DAMN IT!!!
Just Kidding my Brutha..
......I can't wait to get my Coilovers on so I can slam it down on the ground.
NOW SHINE THOSE TIRES DAMN IT!!!
Just Kidding my Brutha..
......I can't wait to get my Coilovers on so I can slam it down on the ground.
Thread Starter
C5 General
Joined: Nov 2005
Posts: 3,391
Likes: 0
From: Boosted in Manhattan & Round Rock TX. President of the Non Club Club of Kansas and Round Rock , Not the flat part.
