Foglight Cover Panel Removal
Thread Starter
Instructor
Joined: Dec 2006
Posts: 155
Likes: 0
From: SJ CA
Foglight Cover Panel Removal
Anyone know how to remove the panels that cover the holes where the foglights would peek through without breaking these cover panels? With removing these panels, you think there would be a significant amount of cold air entering the engine compartment or at least entering my Blackwing?
Premium Supporting Vendor
Joined: Oct 2004
Posts: 36,838
Likes: 438
From: Manassas Park VA
St. Jude Donor '07-'08,-'13-'14, '16-'17
You can do it the easy way or the hard way.
The hard way is to remove them from under the car. See any VaraRam write up to see how to access the foglight area.
Before the VaraRam, I just got out a roto zip and cut the back of them out, and put in screens.
2 hrs vs 10 min. the choice is yours.
Peace
Chip
The hard way is to remove them from under the car. See any VaraRam write up to see how to access the foglight area.
Before the VaraRam, I just got out a roto zip and cut the back of them out, and put in screens.
2 hrs vs 10 min. the choice is yours.
Peace
Chip
__________________
..................Click for
..................Click for
