C5Z Front Valences...
Thread Starter
Melting Slicks
Joined: Aug 2002
Posts: 2,737
Likes: 2
From: California USA
C5Z Front Valences...
I just bought all three of the plastic deals beneath the front of the car. THe one that bends in and the two outers. Before I crawl under there, how are these installed? Anyone?
Racer
Joined: Mar 2007
Posts: 430
Likes: 2
The middle one is easy. There are a couple of spring-loaded cables on the back side. Unhook the springs (carefully) and the whole thing pops out. Transfer the hardware to the new part and then reinstall.
The sides are screwed in with sheet metal screws to inserts. Don't remember if they are torx or phillips but easy enough as long as your front end is straighter than mine.
The sides are screwed in with sheet metal screws to inserts. Don't remember if they are torx or phillips but easy enough as long as your front end is straighter than mine.
