Cracking yourself up 101
Le Mans Master
Joined: May 2006
Posts: 7,885
Likes: 260
From: Hillsboro OR
Instructor
Joined: Dec 2006
Posts: 201
Likes: 3
From: Lee's Summit Mo
St. Jude Donor '07
Le Mans Master
Joined: Feb 2006
Posts: 5,488
Likes: 4
From: USA
Without seeing your swing, I can't make any steadfast suggestions. BUT, I will say, make sure you have it teed high enough(over half of ball above top of driver), place 60% of weight on right foot(for a righty) in your setup, make a full shoulder turn(without trying to swing the club any further than normal), transfer weight to left side to start the downswing(do this by TURNING your hips, not SLIDING them), make sure to keep your head BEHIND the ball at impact, and make a full follow through by letting the clubs velocity bring you up and into your finish. And above all, RELAX! The club isn't going anywhere without you, so don't be in any hurry.
Any more problems, send me a video of your swing, and I'll see if I can break it down for you. Two swings from the back, and two from the side, minimum.
Any more problems, send me a video of your swing, and I'll see if I can break it down for you. Two swings from the back, and two from the side, minimum.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Le Mans Master
Joined: May 2007
Posts: 5,383
Likes: 6
From: hagerstown md
St. Jude Donor '08-'09
No. Their website is taylormadegolf.com
Now, that will be 3 dollars, for the referral, please. I charge $60.00 an hour. That's $1.00 a minute. It takes me, roughly, three minutes to read your post, and type out a reply. Therefore, that's $3.00, since you didn't ask for a "freebie".
Now, that will be 3 dollars, for the referral, please. I charge $60.00 an hour. That's $1.00 a minute. It takes me, roughly, three minutes to read your post, and type out a reply. Therefore, that's $3.00, since you didn't ask for a "freebie".
Pro
Joined: Jul 2006
Posts: 608
Likes: 0
From: jacksonville north carolina
No. Their website is taylormadegolf.com
Now, that will be 3 dollars, for the referral, please. I charge $60.00 an hour. That's $1.00 a minute. It takes me, roughly, three minutes to read your post, and type out a reply. Therefore, that's $3.00, since you didn't ask for a "freebie".
Now, that will be 3 dollars, for the referral, please. I charge $60.00 an hour. That's $1.00 a minute. It takes me, roughly, three minutes to read your post, and type out a reply. Therefore, that's $3.00, since you didn't ask for a "freebie".
